Step 11 of 14 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · Solutions & Volumetric Analysis · Step 11

Follow the worked example. At each stage, explain why the next step is justified.

A water sample contains 6.00 × 10⁻⁴ mol L⁻¹ of calcium ions and no other hardness ions. Taking M(CaCO₃) as 100 g mol⁻¹, give the hardness in mg L⁻¹ of CaCO₃.

A water sample contains 6.00 × 10⁻⁴ mol L⁻¹ of calcium ions and no other hardness ions.

Taking M(CaCO₃) as 100 g mol⁻¹, give the hardness in mg L⁻¹ of CaCO₃.

Read it once, slowly. Then copy it onto your page.
  • What is given? 6.00 × 10⁻⁴ mol of Ca²⁺ in each litre. Calcium is the only hardness ion: no magnesium to add on.
  • M(CaCO₃) = 100: one mole of calcium carbonate weighs 100 g.
  • What do they want? The hardness in mg L⁻¹ of CaCO₃: milligrams in each litre, written as if it were all calcium carbonate.
Céim

Ordinary Level Chemistry · Solutions & Volumetric Analysis · Step 11 of 14

Water analysis / hardness

Water hardness is given as the mass of calcium carbonate, CaCO₃, that would hold the same number of moles of calcium or magnesium ions.

Why it matters

Hardness questions ask you to change mol L⁻¹ into mg L⁻¹ of CaCO₃ and to say which kind of hardness boiling removes.

The worked example

A water sample contains 6.00 × 10⁻⁴ mol L⁻¹ of calcium ions and no other hardness ions. Taking M(CaCO₃) as 100 g mol⁻¹, give the hardness in mg L⁻¹ of CaCO₃.

How the worked example goes

  1. Read

    • What is given? 6.00 × 10⁻⁴ mol of Ca²⁺ in each litre. Calcium is the only hardness ion: no magnesium to add on.
    • M(CaCO₃) = 100: one mole of calcium carbonate weighs 100 g.
    • What do they want? The hardness in mg L⁻¹ of CaCO₃: milligrams in each litre, written as if it were all calcium carbonate.
  2. Understand

    • Why calcium carbonate?
    • Hard water does not easily form a lather with soap. Dissolved Ca²⁺ and Mg²⁺ ions cause it.
    • Hardness is always reported as one substance, CaCO₃, so different waters can be compared.
  3. Reduce

    • Moles to grams of CaCO₃: what do I do with 100? Multiply by 100: Each mole weighs 100 g, so the grams are 100 times the moles.
    • Where do I start?
    • Three short lines: moles of CaCO₃, then grams, then milligrams. All per litre.
  4. Solve

    • Work it out.
    • Moles of CaCO₃ per litre (1 : 1)
    • = 6.00 × 10⁻⁴ mol
  5. Check

    • Is it right, and did I answer it?
    • Back to moles: 60.0 ÷ 1000 ÷ 100 = 6.00 × 10⁻⁴ mol L⁻¹ ✓
    • Units: mol L⁻¹ × g mol⁻¹ = g L⁻¹, then × 1000 gives mg L⁻¹ ✓

Key terms

hard water · temporary hardness · permanent hardness · limescale