Step 5 of 14 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · Solutions & Volumetric Analysis · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

Before taking a 25.0 mL sample of acid, a pupil rinses the pipette with deionised water only. Explain what happens to the titre and to the calculated acid concentration.

Before taking 25.0 mL of acid, a pupil rinses the pipette with deionised water only.

Explain what happens to the titre and to the calculated acid concentration.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A titration. The pipette measures 25.0 mL of acid into the conical flask. Base runs in from the burette.
  • The slip: the pipette was rinsed with deionised water only. The last rinse should be with the acid itself.
  • What do they want? The titre (the volume of base added): bigger, smaller or the same? Then the acid concentration worked out: too high, too low or right?
Céim

Ordinary Level Chemistry · Solutions & Volumetric Analysis · Step 5 of 14

The titration technique [practical work]

Each piece of titration equipment must be rinsed with the right liquid, and readings must show only the liquid that really reached the flask.

Why it matters

Practical questions ask what happens to the titre when a step is done wrongly, and you must give the direction and the reason.

The worked example

Before taking 25.0 mL of acid, a pupil rinses the pipette with deionised water only. Explain what happens to the titre and to the calculated acid concentration.

How the worked example goes

  1. Read

    • What is going on? A titration. The pipette measures 25.0 mL of acid into the conical flask. Base runs in from the burette.
    • The slip: the pipette was rinsed with deionised water only. The last rinse should be with the acid itself.
    • What do they want? The titre (the volume of base added): bigger, smaller or the same? Then the acid concentration worked out: too high, too low or right?
  2. Understand

    • What does the water do?
    • A water rinse leaves drops of water inside the pipette.
    • Draw up the acid and it mixes with those drops. The 25.0 mL taken is now slightly more dilute: it holds fewer moles of acid than it should.
  3. Reduce

    • The calculation uses the smaller titre and 25.0 mL of acid. The answer comes out… Too low: A smaller titre gives fewer moles of base, so fewer moles of acid shared over the same 25.0 mL.
    • How do I set out the answer?
    • An explain answer gives the cause, then each effect in order, each with its reason.
  4. Solve

    • Write the explanation.
    • 1. Water left in the pipette dilutes the acid sample.
    • 2. The 25.0 mL sample holds fewer moles of acid than it should.
  5. Check

    • Is it right, and did I answer it?
    • Good sample: 0.100 × 20.0 ÷ 25.0 = 0.0800
    • Diluted sample: 0.100 × 19.2 ÷ 25.0 = 0.0768

Common mistakes to avoid

Key terms

pipette · burette · conical flask · titre