Step 10 of 14 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · Solutions & Volumetric Analysis · Step 10

Follow the worked example. At each stage, explain why the next step is justified.

1 mol of MnO₄⁻ reacts with 5 mol of Fe²⁺. A sample needs 15.0 mL of 0.0400 mol L⁻¹ permanganate. Find the moles of Fe²⁺.

1 mol of MnO₄⁻ reacts with 5 mol of Fe²⁺.

A sample needs 15.0 mL of 0.0400 mol L⁻¹ permanganate.

Find the moles of Fe²⁺.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A redox titration. Permanganate, MnO₄⁻, reacts with iron(II) ions, Fe²⁺. The ratio: 1 MnO₄⁻ to 5 Fe²⁺.
  • What is measured? The titre, 15.0 mL, of permanganate at 0.0400 mol L⁻¹.
  • What do they want? The moles of Fe²⁺ in the sample. Moles only, not a concentration.
Céim

Ordinary Level Chemistry · Solutions & Volumetric Analysis · Step 10 of 14

Redox titrations (permanganate, thiosulfate)

In a redox titration the balanced equation tells you how many moles of one substance react with each mole of the other, so you scale the moles by that number.

Why it matters

Permanganate and thiosulfate titrations are set often, and most lost marks come from using the wrong ratio.

The worked example

1 mol of MnO₄⁻ reacts with 5 mol of Fe²⁺. A sample needs 15.0 mL of 0.0400 mol L⁻¹ permanganate. Find the moles of Fe²⁺.

How the worked example goes

  1. Read

    • What is going on? A redox titration. Permanganate, MnO₄⁻, reacts with iron(II) ions, Fe²⁺. The ratio: 1 MnO₄⁻ to 5 Fe²⁺.
    • What is measured? The titre, 15.0 mL, of permanganate at 0.0400 mol L⁻¹.
    • What do they want? The moles of Fe²⁺ in the sample. Moles only, not a concentration.
  2. Understand

    • How much permanganate went in?
    • A litre of the permanganate holds 0.0400 mol. Only 15.0 mL went in: 0.0150 L.
    • Moles in a solution
  3. Reduce

    • I know n(MnO₄⁻). How do I get n(Fe²⁺)? Multiply it by 5: Each MnO₄⁻ uses up 5 Fe²⁺, so there are 5 times as many moles of Fe²⁺.
    • Where do I start?
    • With the solution I know both c and V for: the permanganate. Then the ratio carries the moles to the iron.
  4. Solve

    • Moles of permanganate.
    • V = 15.0 ÷ 1000 = 0.0150 L
    • n(MnO₄⁻) = 0.0400 × 0.0150
  5. Check

    • Is it right, and did I answer it?
    • Back the other way: 3.00 × 10⁻³ ÷ 5 = 6.00 × 10⁻⁴ mol of MnO₄⁻ ✓
    • Size: the iron's moles are bigger than the permanganate's, as 1 : 5 says ✓

Common mistakes to avoid

Key terms

permanganate · thiosulfate · oxidation · reduction