Step 6 of 14 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Chemistry · Solutions & Volumetric Analysis · Step 6

Follow the worked example. At each stage, explain why the next step is justified.

A 25.0 mL sample of hydrochloric acid is neutralised by 20.0 mL of 0.150 mol L⁻¹ sodium hydroxide. HCl + NaOH → NaCl + H₂O. Find the concentration of the acid.

25.0 mL of hydrochloric acid is neutralised by 20.0 mL of 0.150 mol L⁻¹ NaOH.

HCl + NaOH → NaCl + H₂O

Find the concentration of the acid.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A titration. A pipette puts 25.0 mL of HCl in the flask. NaOH runs in from the burette until the acid is just neutralised.
  • What is given? The NaOH it took, 20.0 mL: the titre. And its concentration, 0.150 mol L⁻¹: 0.150 moles in every litre.
  • The equation: one HCl reacts with one NaOH. That is a 1 : 1 ratio.
  • What do they want? The concentration of the acid: moles of HCl in each litre, in mol L⁻¹.
Céim

Ordinary Level Chemistry · Solutions & Volumetric Analysis · Step 6 of 14

Acid–base titration calculations

In a titration, the moles of the solution in the burette tell you the moles of the solution in the flask, using the numbers in the balanced equation.

Why it matters

Titration sums are one of the most common long questions, and marks are given for moles, the mole ratio and the final concentration.

The worked example

25.0 mL of hydrochloric acid is neutralised by 20.0 mL of 0.150 mol L⁻¹ NaOH. HCl + NaOH → NaCl + H₂O Find the concentration of the acid.

How the worked example goes

  1. Read

    • What is going on? A titration. A pipette puts 25.0 mL of HCl in the flask. NaOH runs in from the burette until the acid is just neutralised.
    • What is given? The NaOH it took, 20.0 mL: the titre. And its concentration, 0.150 mol L⁻¹: 0.150 moles in every litre.
    • The equation: one HCl reacts with one NaOH. That is a 1 : 1 ratio.
  2. Understand

    • How much NaOH went in?
    • A full litre of the NaOH holds 0.150 mol. Only 20.0 mL went in: that is 0.0200 L, a small part of a litre.
    • So the moles of NaOH are 0.150 × 0.0200. That count is the number of moles, n.
  3. Reduce

    • I will know the moles of HCl. Which volume do I divide by to get c(HCl)? 0.0250 L, the acid: Every mole of HCl started in the 25.0 mL in the flask, so share the moles over 0.0250 L.
    • Where do I start?
    • Start with the solution I know both c and V for: the NaOH. The 1 : 1 ratio carries the moles to the acid.
  4. Solve

    • Moles of NaOH, then moles of HCl.
    • V(NaOH) = 20.0 ÷ 1000 = 0.0200 L
    • n(NaOH) = 0.150 × 0.0200
  5. Check

    • Is it right, and did I answer it?
    • Second route: 1 : 1, so c × V is the same for both: 0.150 × 20.0 ÷ 25.0 = 0.12 ✓
    • Size: more acid (25.0 mL) than base (20.0 mL) was needed, so the acid is less concentrated: 0.120 < 0.150 ✓

Common mistakes to avoid

Key terms

titration · mole ratio · neutralisation · average titre