Step 12 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 12

Follow the worked example. At each stage, explain why the next step is justified.

A water sample contains 2.00 × 10⁻⁴ mol L⁻¹ of Ca²⁺ and no other hardness-causing ions. Express its hardness in mg L⁻¹ as CaCO₃, using M(CaCO₃) = 100 g mol⁻¹.

A water sample contains 2.00 × 10⁻⁴ mol L⁻¹ of Ca²⁺ and no other hardness ions. Express its hardness in mg L⁻¹ as CaCO₃, using M(CaCO₃) = 100 g mol⁻¹.

Read it once, slowly. Then copy it onto your page.
  • What is given? Each litre holds 2.00 × 10⁻⁴ mol of Ca²⁺. No other hardness ions: no Mg²⁺ to add in, so Ca²⁺ is all the hardness.
  • M(CaCO₃) = 100 g mol⁻¹: one mole of calcium carbonate weighs 100 g.
  • What do they want? Hardness in mg L⁻¹, as CaCO₃: milligrams per litre, counted as if the calcium were calcium carbonate.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 12 of 15

Water analysis / hardness

Hardness is reported as the mass of CaCO₃ that would contain the same moles of Ca²⁺ and Mg²⁺ ions, usually in mg L⁻¹.

Why it matters

Water analysis questions test the conversion from mol L⁻¹ of hardness ions to mg L⁻¹ CaCO₃, and the difference between temporary and permanent hardness.

The worked example

A water sample contains 2.00 × 10⁻⁴ mol L⁻¹ of Ca²⁺ and no other hardness ions. Express its hardness in mg L⁻¹ as CaCO₃, using M(CaCO₃) = 100 g mol⁻¹.

How the worked example goes

  1. Read

    • What is given? Each litre holds 2.00 × 10⁻⁴ mol of Ca²⁺. No other hardness ions: no Mg²⁺ to add in, so Ca²⁺ is all the hardness.
    • M(CaCO₃) = 100 g mol⁻¹: one mole of calcium carbonate weighs 100 g.
    • What do they want? Hardness in mg L⁻¹, as CaCO₃: milligrams per litre, counted as if the calcium were calcium carbonate.
  2. Understand

    • What does 'as CaCO₃' mean?
    • Hard water does not easily form a lather with soap. Dissolved Ca²⁺ and Mg²⁺ ions cause it.
    • Hardness is reported in one common currency, so different waters can be compared. That currency is CaCO₃.
  3. Reduce

    • Which molar mass turns the moles into the reported mass? 100 g mol⁻¹, of CaCO₃: The hardness is reported as CaCO₃, so each mole counts as 100 g of calcium carbonate.
    • Where do I start?
    • Moles of CaCO₃ per litre first, then multiply by 100 for grams, then by 1000 for milligrams.
  4. Solve

    • Work it out.
    • n(CaCO₃) = 2.00 × 10⁻⁴ mol L⁻¹ (1 : 1)
    • mass = 2.00 × 10⁻⁴ × 100 = 0.0200 g L⁻¹
  5. Check

    • Is it right?
    • Work back: 20.0 mg = 0.0200 g, and 0.0200 ÷ 100 = 2.00 × 10⁻⁴ mol, the Ca²⁺ given ✓
    • Units: mol L⁻¹ × g mol⁻¹ = g L⁻¹, then × 1000 gives mg L⁻¹ ✓

Common mistakes to avoid

Key terms

hardness · CaCO₃ equivalent · temporary hardness · permanent hardness