Step 15 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 15

Follow the worked example. At each stage, explain why the next step is justified.

A burette reads 1.10 mL initially and 24.30 mL finally; readings increase down the scale. Find the volume delivered.

A burette reads 1.10 mL initially and 24.30 mL finally. Readings increase down the scale. Find the volume delivered.

Read it once, slowly. Then copy it onto your page.
  • What is given? Two readings of the meniscus: 1.10 mL before the titration, 24.30 mL after.
  • Readings increase down the scale: 0 is at the top of a burette. As liquid runs out, the level falls to bigger numbers.
  • What do they want? The volume delivered: how much ran out of the burette. In a titration that is the titre.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 15 of 15

Titration data & error analysis [investigation link]

A titre is the difference between final and initial burette readings, and its reliability depends on reading uncertainty and on averaging only concordant results.

Why it matters

Data-handling questions award marks for correct titres, percentage uncertainty and justified choices about which results to average.

The worked example

A burette reads 1.10 mL initially and 24.30 mL finally. Readings increase down the scale. Find the volume delivered.

How the worked example goes

  1. Read

    • What is given? Two readings of the meniscus: 1.10 mL before the titration, 24.30 mL after.
    • Readings increase down the scale: 0 is at the top of a burette. As liquid runs out, the level falls to bigger numbers.
    • What do they want? The volume delivered: how much ran out of the burette. In a titration that is the titre.
  2. Understand

    • How do I picture it?
    • Picture the burette. The meniscus starts a little below 0, at 1.10. Liquid runs out and the meniscus falls to 24.30.
    • If it had started exactly at 0, the final reading would be the volume delivered. It did not: the top 1.10 mL was never in play.
  3. Reduce

    • Which gives the titre? Final − initial: The reading rose from 1.10 to 24.30 as liquid left, so the difference is what was delivered.
    • Where do I start?
    • Write the rule in words, then put in the two readings: the larger, final one first.
  4. Solve

    • Work it out.
    • titre = final reading − initial reading
    • titre = 24.30 − 1.10
  5. Check

    • Is it right?
    • Start + delivered = final: 1.10 + 23.20 = 24.30 mL ✓
    • Positive, and less than the 50 mL a standard burette holds ✓

Key terms

titre · concordant results · percentage uncertainty · rough titration