Step 4 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

10.6 g of anhydrous sodium carbonate, Na₂CO₃, is used to prepare 500 mL of standard solution. Using M(Na₂CO₃) = 106 g mol⁻¹, calculate the concentration and describe the preparation.

10.6 g of anhydrous sodium carbonate, Na₂CO₃, is used to prepare 500 mL of standard solution. Using M(Na₂CO₃) = 106 g mol⁻¹, calculate the concentration and describe the preparation.

Read it once, slowly. Then copy it onto your page.
  • What is given? 10.6 g of sodium carbonate, weighed out. Anhydrous: no water locked in the crystals, so every gram is Na₂CO₃.
  • It is made up to 500 mL of solution. A standard solution is one whose concentration is known accurately.
  • M = 106 g mol⁻¹: the molar mass, the mass of one mole. It turns grams into moles.
  • What do they want? Two things: the concentration in mol L⁻¹, and the preparation, step by step.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 4 of 15

Preparing a standard solution

A standard solution has an accurately known concentration because a precisely weighed primary standard is dissolved and made up exactly to the mark of a volumetric flask.

Why it matters

Preparation questions award marks for both the concentration calculation and the procedure, including quantitative transfer, making up to the mark and mixing.

The worked example

10.6 g of anhydrous sodium carbonate, Na₂CO₃, is used to prepare 500 mL of standard solution. Using M(Na₂CO₃) = 106 g mol⁻¹, calculate the concentration and describe the preparation.

How the worked example goes

  1. Read

    • What is given? 10.6 g of sodium carbonate, weighed out. Anhydrous: no water locked in the crystals, so every gram is Na₂CO₃.
    • It is made up to 500 mL of solution. A standard solution is one whose concentration is known accurately.
    • M = 106 g mol⁻¹: the molar mass, the mass of one mole. It turns grams into moles.
  2. Understand

    • How do I get from grams to mol L⁻¹?
    • Concentration counts moles, but a balance gives grams. One mole of Na₂CO₃ weighs 106 g, so 10.6 g is a tenth of that.
    • That count of moles is n = m ÷ M. Then share the moles over the litres of solution, as always.
  3. Reduce

    • Where do I start?
    • Grams first, because the mass is what was measured. Then the volume in litres, then divide.
    • M(Na₂CO₃) = 2(23) + 12 + 3(16) = 106 ✓
  4. Solve

    • Moles, then concentration.
    • n = (10.6)/(106) = 0.100 mol
    • V = 500 ÷ 1000 = 0.500 L
  5. Check

    • Is it right?
    • Back to the mass: m = c × V × M = 0.200 × 0.500 × 106 = 10.6 g ✓
    • Units: g ÷ g mol⁻¹ = mol, then mol ÷ L = mol L⁻¹ ✓

Key terms

primary standard · volumetric flask · quantitative transfer · made up to the mark