Step 3 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 3

Follow the worked example. At each stage, explain why the next step is justified.

A 1.50 kg water sample contains 4.50 mg of a dissolved solute. Calculate the concentration in ppm by mass.

A 1.50 kg water sample contains 4.50 mg of a dissolved solute. Calculate the concentration in ppm by mass.

Read it once, slowly. Then copy it onto your page.
  • What is given? A 1.50 kg water sample: the whole sample, water and solute together, weighed in kilograms.
  • 4.50 mg of solute: a tiny mass, in milligrams. Trap: the two masses are in different units.
  • What do they want? The concentration in ppm, parts per million, by mass: compare mass with mass.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 3 of 15

Parts per million and dilution evidence

Parts per million by mass is the mass of solute per million equal mass units of the whole sample, so 1 ppm is 1 mg of solute per kg.

Why it matters

Water-quality questions report trace substances in ppm, and marks depend on converting units consistently and stating any density assumption.

The worked example

A 1.50 kg water sample contains 4.50 mg of a dissolved solute. Calculate the concentration in ppm by mass.

How the worked example goes

  1. Read

    • What is given? A 1.50 kg water sample: the whole sample, water and solute together, weighed in kilograms.
    • 4.50 mg of solute: a tiny mass, in milligrams. Trap: the two masses are in different units.
    • What do they want? The concentration in ppm, parts per million, by mass: compare mass with mass.
  2. Understand

    • What does 'parts per million' mean?
    • Cut the sample into a million equal parts by mass. ppm is how many of those parts are solute.
    • It is like a percentage (parts per hundred), but per million, because the solute is such a trace.
  3. Reduce

    • Write 1.50 kg in mg. 1.50 × 10⁶ mg: 1.50 kg × 1000 = 1500 g, and 1500 g × 1000 = 1.50 × 10⁶ mg.
    • Where do I start?
    • Convert the sample to mg on its own line. Then the rule: solute over sample, times 10⁶.
  4. Solve

    • Work it out.
    • With both masses in mg, the fraction is a pure number. Times 10⁶ turns it into parts per million.
    • m(sample) = 1.50 × 1000 × 1000 = 1.50 × 10⁶ mg
  5. Check

    • Is it right?
    • Second route: 4.50 mg ÷ 1.50 kg = 3.00 mg kg⁻¹, and 1 mg per kg is 1 ppm ✓
    • Back to the solute: 3.00 mg in each kg, over 1.50 kg, is 3.00 × 1.50 = 4.50 mg ✓

Common mistakes to avoid

Key terms

ppm · mg kg⁻¹ · density · dilution factor