Step 5 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

12.0 mL of a 0.300 mol L⁻¹ stock solution is diluted with water to a total volume of 110 mL. Find the concentration of the diluted solution.

12.0 mL of a 0.300 mol L⁻¹ stock solution is diluted with water to a total volume of 110 mL. Find the concentration of the diluted solution.

Read it once, slowly. Then copy it onto your page.
  • What is given? 12.0 mL taken from a 0.300 mol L⁻¹ stock solution: the concentrated bottle on the shelf.
  • Diluted with water: only water is added. No solute goes in or out.
  • Total volume of 110 mL: the finished solution. Trap: that is not the water added; the water added is less.
  • What do they want? The concentration of the diluted solution, in mol L⁻¹. Call it c₂.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 5 of 15

Dilution calculations

Dilution adds solvent but no solute, so the moles of solute before and after are equal: c₁V₁ = c₂V₂.

Why it matters

Dilution is the link step in many volumetric questions, and a wrong dilution factor costs marks on every later part.

The worked example

12.0 mL of a 0.300 mol L⁻¹ stock solution is diluted with water to a total volume of 110 mL. Find the concentration of the diluted solution.

How the worked example goes

  1. Read

    • What is given? 12.0 mL taken from a 0.300 mol L⁻¹ stock solution: the concentrated bottle on the shelf.
    • Diluted with water: only water is added. No solute goes in or out.
    • Total volume of 110 mL: the finished solution. Trap: that is not the water added; the water added is less.
  2. Understand

    • What stays the same when I add water?
    • The moles of solute. The 12.0 mL portion holds some moles; adding water spreads them out but adds none.
    • Count them: 12.0 mL is 0.0120 L, so n = 0.300 × 0.0120 = 0.00360 mol.
  3. Reduce

    • Which volume is V₂? 110 mL, the total volume: V₂ is the volume the moles are spread through at the end: the whole diluted solution.
    • Where do I start?
    • Three of the four values are known. Rearrange for the unknown: divide both sides by V₂.
  4. Solve

    • Work it out.
    • c₂ = (0.300 × 12.0)/(110)
    • c₂ = (3.60)/(110)
  5. Check

    • Is it right?
    • Moles before: 0.300 × 0.0120 = 0.00360 mol. Moles after: 0.032727… × 0.110 = 0.00360 mol ✓
    • Size: the volume grew by 110 ÷ 12.0 ≈ 9.17 times, so c should fall by the same factor. 0.300 ÷ 9.17 ≈ 0.0327 ✓

Common mistakes to avoid

Key terms

dilution · stock solution · dilution factor · serial dilution