Step 1 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 1

Follow the worked example. At each stage, explain why the next step is justified.

A solution contains 0.0500 mol of solute in a total volume of 250 mL. Find its molar concentration.

A solution contains 0.0500 mol of solute in a total volume of 250 mL. Find its molar concentration.

Read it once, slowly. Then copy it onto your page.
  • What is given? 0.0500 mol of solute: the amount of the dissolved substance, already counted in moles. No grams to convert.
  • Total volume 250 mL: the whole solution, solute and water together. Not the water poured in.
  • What do they want? Molar concentration: how many moles of solute are in each litre of the solution, in mol L⁻¹.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 1 of 15

Concentration (mol/L, g/L, %)

Molar concentration is the amount of solute in moles divided by the volume of the final solution in litres.

Why it matters

Almost every volumetric calculation in the exam passes through c = n/V, so an error here carries through the whole question.

The worked example

A solution contains 0.0500 mol of solute in a total volume of 250 mL. Find its molar concentration.

How the worked example goes

  1. Read

    • What is given? 0.0500 mol of solute: the amount of the dissolved substance, already counted in moles. No grams to convert.
    • Total volume 250 mL: the whole solution, solute and water together. Not the water poured in.
    • What do they want? Molar concentration: how many moles of solute are in each litre of the solution, in mol L⁻¹.
  2. Understand

    • How do I picture it?
    • Picture 250 mL of solution holding 0.0500 mol. A litre is 1000 mL, four of these portions.
    • Four portions, each with 0.0500 mol, would hold 4 × 0.0500 moles. That 'moles in one litre' is the molar concentration.
  3. Reduce

    • Which calculation gives c in mol L⁻¹? 0.0500 ÷ 0.250: Moles divided by the solution volume in litres: 250 mL is 0.250 L.
    • Where do I start?
    • The moles are given. Change the volume to litres on its own line, then make one division.
  4. Solve

    • Change the volume, then divide.
    • Dividing by 1000 turns millilitres into litres, because 1000 mL make 1 L.
    • V = 250 ÷ 1000 = 0.250 L
  5. Check

    • Is it right?
    • Back to the moles: n = c × V = 0.200 × 0.250 = 0.0500 mol, the amount given ✓
    • Size: four 250 mL portions make a litre, and 4 × 0.0500 = 0.200 mol ✓

Key terms

molar concentration · mol L⁻¹ · solute · final solution volume