Step 9 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 9

Follow the worked example. At each stage, explain why the next step is justified.

On a titration curve the steep rise at equivalence runs from pH 3 to pH 10. Assess whether an indicator that changes colour over pH 4 to 6 is suitable.

On a titration curve the steep rise at equivalence runs from pH 3 to pH 10. Assess whether an indicator that changes colour over pH 4 to 6 is suitable.

Read it once, slowly. Then copy it onto your page.
  • What is given? The steep rise: near equivalence the pH jumps quickly, here from pH 3 to pH 10.
  • The indicator changes colour over pH 4 to 6: below 4 it is one colour, above 6 the other.
  • What do they want? Assess whether it is suitable: a yes or no, and the reason that decides it.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 9 of 15

Choosing the right indicator

An indicator is suitable only if its whole colour-change range falls within the steep, near-vertical part of the titration curve at equivalence.

Why it matters

Indicator questions are scored on comparing the change range with the steep region, not on recalling a single named indicator.

The worked example

On a titration curve the steep rise at equivalence runs from pH 3 to pH 10. Assess whether an indicator that changes colour over pH 4 to 6 is suitable.

How the worked example goes

  1. Read

    • What is given? The steep rise: near equivalence the pH jumps quickly, here from pH 3 to pH 10.
    • The indicator changes colour over pH 4 to 6: below 4 it is one colour, above 6 the other.
    • What do they want? Assess whether it is suitable: a yes or no, and the reason that decides it.
  2. Understand

    • What is happening at the steep rise?
    • Before equivalence, each drop of base barely moves the pH. Close to equivalence, one drop sends the pH leaping from about 3 to about 10.
    • The equivalence point is inside that leap. The end point is where the indicator changes colour. We want the two at the same drop.
  3. Reduce

    • What decides whether this indicator is suitable? Its whole range lies inside 3–10: Then the colour changes within a drop of equivalence, wherever in the leap that is.
    • Where do I start?
    • Compare the two ends. The indicator's low end must not be below 3; its high end must not be above 10.
  4. Solve

    • Check each end.
    • Shaded: the steep rise, pH 3 to 10. Dots: the two ends of the indicator's change, pH 4 and pH 6.
    • Low end: 4 ≥ 3, so the change does not start before the steep rise.
  5. Check

    • Is it right?
    • Both ends inside: 4 and 6 are each between 3 and 10 ✓
    • Contrast: an indicator changing over pH 1 to 2 would change before the leap, so its end point would come too early.

Common mistakes to avoid

Key terms

equivalence point · end point · indicator range · titration curve