Step 7 of 15 · Worked example · TEACH

← Solutions & Volumetric Analysis

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Chemistry · Solutions & Volumetric Analysis · Step 7

Follow the worked example. At each stage, explain why the next step is justified.

A 21.0 mL aliquot of HCl is neutralised by 27.0 mL of 0.0300 mol L⁻¹ NaOH. The reaction is HCl + NaOH → NaCl + H₂O. Find the concentration of the HCl.

A 21.0 mL aliquot of HCl is neutralised by 27.0 mL of 0.0300 mol L⁻¹ NaOH. The reaction is

HCl + NaOH → NaCl + H₂O

Find the concentration of the HCl.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A titration. A pipette measures 21.0 mL of HCl into the flask: the aliquot. NaOH runs in from the burette until the acid is just neutralised.
  • What is given? The NaOH it took, 27.0 mL: the titre. And 0.0300 mol L⁻¹, the NaOH's concentration: 0.0300 moles of NaOH in every litre.
  • The balanced equation: one HCl reacts with one NaOH.
  • What do they want? The concentration of the HCl: how many moles of HCl are in each litre of the acid, in mol L⁻¹.
Céim

Higher Level Chemistry · Solutions & Volumetric Analysis · Step 7 of 15

Acid–base titration calculations

In an acid–base titration the moles of titrant used, multiplied by the mole ratio from the balanced equation, give the moles of analyte in the aliquot.

Why it matters

Titration calculations are worth heavy marks and examiners check that the mole ratio from the equation is applied before dividing by the aliquot volume.

The worked example

A 21.0 mL aliquot of HCl is neutralised by 27.0 mL of 0.0300 mol L⁻¹ NaOH. The reaction is HCl + NaOH → NaCl + H₂O Find the concentration of the HCl.

How the worked example goes

  1. Read

    • What is going on? A titration. A pipette measures 21.0 mL of HCl into the flask: the aliquot. NaOH runs in from the burette until the acid is just neutralised.
    • What is given? The NaOH it took, 27.0 mL: the titre. And 0.0300 mol L⁻¹, the NaOH's concentration: 0.0300 moles of NaOH in every litre.
    • The balanced equation: one HCl reacts with one NaOH.
  2. Understand

    • How much NaOH actually went in?
    • A full litre of that NaOH holds 0.0300 mol. We ran in far less than a litre: 27.0 mL, which is 0.0270 L.
    • So the NaOH that went in is 0.0270 of a litre's worth: 0.0300 × 0.0270 moles. That count is the number of moles, n.
  3. Reduce

    • You will know the moles of HCl. Which volume do you divide by to get c(HCl)? 0.0210 L, the aliquot: Every mole of HCl started in the 21.0 mL aliquot, so the acid's concentration is its moles shared over 0.0210 L.
    • Where do I start?
    • Start with the solution you know both c and V for: the NaOH. Then the ratio carries the moles across to the acid.
  4. Solve

    • Moles of NaOH, then moles of HCl.
    • V(NaOH) = 27.0 ÷ 1000 = 0.0270 L
    • n(NaOH) = 0.0300 × 0.0270
  5. Check

    • Is it right?
    • Second route: in a 1 : 1 reaction, c × V is the same for acid and base, so c = 0.0300 × 27.0 ÷ 21.0 = 0.038571… ✓
    • Size: 21.0 mL of acid matched 27.0 mL of base, so the acid is more concentrated than the NaOH: 0.0386 > 0.0300 ✓

Common mistakes to avoid

Key terms

equivalence point · mole ratio · titre · mean titre