Step 2 of 11 · Worked example · TEACH

← Waves, Sound & Standing Waves

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Waves, Sound & Standing Waves · Step 2

Follow the worked example. At each stage, explain why the next step is justified.

Classify a rope wave moving horizontally while rope segments move vertically and explain using directions.

A wave moves horizontally along a rope. Each bit of rope moves vertically.

Is it transverse or longitudinal? Explain, using the directions.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A wave runs along a rope. It moves horizontally: that is the way the wave travels.
  • What else is fixed? Each bit of rope moves vertically: up and down. The bits do not travel with the wave.
  • What do they want? Transverse or longitudinal, then explain using the directions: both of them, not just one.
Céim

Ordinary Level Physics · Waves, Sound & Standing Waves · Step 2 of 11

Transverse & Longitudinal Waves

Distinguish local oscillation from propagation and identify the stated boundary or source conditions.

Why it matters

Identify the two directions.

The worked example

A wave moves horizontally along a rope. Each bit of rope moves vertically. Is it transverse or longitudinal? Explain, using the directions.

How the worked example goes

  1. Read

    • What is going on? A wave runs along a rope. It moves horizontally: that is the way the wave travels.
    • What else is fixed? Each bit of rope moves vertically: up and down. The bits do not travel with the wave.
    • What do they want? Transverse or longitudinal, then explain using the directions: both of them, not just one.
  2. Understand

    • How do I picture it?
    • Tie a rope to a wall and flick your end up and down. A bump runs along the rope to the wall.
    • Now watch a ribbon tied to the middle of the rope. It goes up and down as the bump passes, and stays at the middle.
  3. Reduce

    • What decides whether this wave is transverse or longitudinal? Angle between the two directions: Compare the vibration with the travel. At 90°: transverse. Along the same line: longitudinal.
    • Which test do I use?
    • Write the two directions side by side, then the angle between them. The angle gives the type, and the reason is your explanation.
  4. Solve

    • Compare the two directions.
    • 1. The wave travels horizontally.
    • 2. The rope vibrates vertically.
  5. Check

    • Is it right?
    • Picture the other case: the rope sliding to and fro along its length. Then vibration and travel share one line: longitudinal.
    • Ours moves up and down, across the rope. So transverse ✓