Step 10 of 11 · Worked example · TEACH

← Waves, Sound & Standing Waves

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Waves, Sound & Standing Waves · Step 10

Follow the worked example. At each stage, explain why the next step is justified.

A vibrating system has its largest steady response when driven near 5 Hz and smaller responses at 3 Hz and 7 Hz. Identify the phenomenon and estimate its natural frequency from this evidence.

A vibrating system has its largest steady response when driven near 5 Hz. It has smaller responses at 3 Hz and 7 Hz.

Identify the phenomenon, and estimate its natural frequency.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Driven means something keeps pushing the system to and fro at a rate we choose: the driving frequency.
  • What is fixed? The vibration is largest when driven near 5 Hz. It is smaller at 3 Hz and 7 Hz: one either side.
  • What do they want? Identify the phenomenon: name the effect. Then estimate its natural frequency: a rough value, in Hz.
Céim

Ordinary Level Physics · Waves, Sound & Standing Waves · Step 10 of 11

Resonance and Doppler Observations

Distinguish local oscillation from propagation and identify the stated boundary or source conditions.

Why it matters

The large response indicates resonance.

The worked example

A vibrating system has its largest steady response when driven near 5 Hz. It has smaller responses at 3 Hz and 7 Hz. Identify the phenomenon, and estimate its natural frequency.

How the worked example goes

  1. Read

    • What is going on? Driven means something keeps pushing the system to and fro at a rate we choose: the driving frequency.
    • What is fixed? The vibration is largest when driven near 5 Hz. It is smaller at 3 Hz and 7 Hz: one either side.
    • What do they want? Identify the phenomenon: name the effect. Then estimate its natural frequency: a rough value, in Hz.
  2. Understand

    • How do I picture it?
    • Plot how big the vibration gets, its response, at each driving frequency. Three readings: 3, 5 and 7 Hz.
    • Small, then big, then small again. The response has a peak, near 5 Hz.
  3. Reduce

    • Only 3, 5 and 7 Hz were tried. What is the best estimate of f₀? About 5 Hz, near the peak: The largest response came when driven near 5 Hz, so f₀ is about 5 Hz. It is an estimate.
    • How do I answer both parts?
    • Name the effect from the peak. Then read f₀ as the driving frequency with the largest response, and call it an estimate.
  4. Solve

    • Write the answer.
    • 1. The response is largest at one driving frequency, near 5 Hz, and smaller either side.
    • 2. So the effect is resonance.
  5. Check

    • Is it right?
    • If f₀ were 7 Hz, driving at 7 Hz would give the largest response. Its response was smaller than at 5 Hz ✓
    • The same test rules out 3 Hz. Smaller on both sides fits a peak near 5 Hz ✓