Ordinary Level Physics · Waves, Sound & Standing Waves · Step 7 of 11
Polarisation
Distinguish local oscillation from propagation and identify the stated boundary or source conditions.
Why it matters
The first polariser selects a transverse oscillation direction.
The worked example
Unpolarised light passes through a polariser, then an analyser. Explain why turning the analyser can change how bright the light is.
How the worked example goes
Read
- What is going on? Ordinary light, like light from a bulb, is unpolarised. We will see what that means.
- What is fixed? Two filters in a row: first a polariser, then a second filter, an analyser. The polariser stays still.
- What do they want? Why turning the analyser can change how bright the light is on the far side. Nothing to calculate.
Understand
- How do I picture the light?
- Light is a transverse wave: it vibrates across its path, at 90° to the way it travels.
- Unpolarised light vibrates in every direction across its path: up and down, sideways, and every slant between.
Reduce
- The light reaching the analyser vibrates one way only. What decides how much gets through? The angle between the axes: The analyser lets through only the part of the vibration along its own axis. How much that is depends on the angle.
- How do I show it changes?
- Use the rule: a filter passes only the part of the vibration along its axis. Try two extreme angles, then one in between.
Solve
- What gets through at each angle?
- At 0°, the axes line up. All the vibration lies along the analyser's axis. All passes: brightest.
- At 90°, the axes are crossed. No part of an up-and-down vibration lies along a sideways axis. Nothing passes: dark.
Check
- Is it right, and is it all?
- Without the polariser, light vibrates every way. Turning one filter would change nothing: some direction always lines up.
- Here it does change, so the polariser must have polarised the light ✓