Step 2 of 8 · Worked example · TEACH

← Temperature, Heat & Thermal Energy

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Temperature, Heat & Thermal Energy · Step 2

Follow the worked example. At each stage, explain why the next step is justified.

A thermometer property has reading 15 at 0°C and 125 at 100°C. It is assumed linear. A sample gives reading 50. Find its temperature.

A thermometer property reads 15 at 0 °C and 125 at 100 °C. It is assumed linear.

A sample gives a reading of 50. Find its temperature.

Read it once, slowly. Then copy it onto your page.
  • What is fixed? Two known points: it reads 15 at 0 °C and 125 at 100 °C. The exam calls them the fixed points.
  • What does linear mean? Assumed linear: equal steps in reading always go with equal steps in temperature.
  • What is measured? A reading of 50. Trap: 50 is in the thermometer's own units. It is not 50 °C.
  • What do they want? Its temperature: the sample's T, in °C.
Céim

Ordinary Level Physics · Temperature, Heat & Thermal Energy · Step 2 of 8

Thermometric Properties & Temperature Scales

Identify the system, temperature changes, changes of state and all energy transfers.

Why it matters

Use temperature = 100 × (x-a)/(b-a).

The worked example

A thermometer property reads 15 at 0 °C and 125 at 100 °C. It is assumed linear. A sample gives a reading of 50. Find its temperature.

How the worked example goes

  1. Read

    • What is fixed? Two known points: it reads 15 at 0 °C and 125 at 100 °C. The exam calls them the fixed points.
    • What does linear mean? Assumed linear: equal steps in reading always go with equal steps in temperature.
    • What is measured? A reading of 50. Trap: 50 is in the thermometer's own units. It is not 50 °C.
  2. Understand

    • How do I picture it?
    • Picture a ruler marked in readings. 0 °C sits at 15, 100 °C at 125. So 100 degrees cover 125 − 15 = 110 units.
    • Linear, so every degree is the same step: 110 ÷ 100 = 1.1 units per degree.
  3. Reduce

    • Readings 15 and 125; the sample reads 50. What fraction of the way up is it? 35/110: 50 − 15 = 35 up from the 0 °C mark, out of 125 − 15 = 110 for the whole scale.
    • Where do I start?
    • That fraction of the 100 °C scale is the temperature. In symbols, with R for a reading:
  4. Solve

    • Measure up from 15, then scale to 100.
    • Take 15 off top and bottom, divide, then multiply by 100. Round only the last line.
    • T = 100 × (50 − 15)/(125 − 15)
  5. Check

    • Is it right?
    • Back to the reading: 1.1 units per degree
    • 1.1 × 31.818… = 35, and 15 + 35 = 50 ✓