Step 5 of 8 · Worked example · TEACH

← Temperature, Heat & Thermal Energy

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Temperature, Heat & Thermal Energy · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

A heater transfers 6000 J to a sample already at its melting point, and the sample melts completely without warming. State the latent heat absorbed by this sample and explain the constant temperature.

A heater gives 6000 J to a sample already at its melting point.

The sample melts completely without warming.

State the latent heat it absorbs, and explain the constant temperature.

Read it once, slowly. Then copy it onto your page.
  • What goes in? 6000 J of energy, to a sample already at its melting point: it is hot enough to melt from the start.
  • What happens? It melts completely without warming. All of it melts, and its temperature does not change: ΔT = 0.
  • What do they want? Two things: a number, the latent heat it absorbs, and a reason, explain the constant temperature.
Céim

Ordinary Level Physics · Temperature, Heat & Thermal Energy · Step 5 of 8

Change of State and Latent Heat

Identify the system, temperature changes, changes of state and all energy transfers.

Why it matters

The sample absorbs 6000 J of latent heat.

The worked example

A heater gives 6000 J to a sample already at its melting point. The sample melts completely without warming. State the latent heat it absorbs, and explain the constant temperature.

How the worked example goes

  1. Read

    • What goes in? 6000 J of energy, to a sample already at its melting point: it is hot enough to melt from the start.
    • What happens? It melts completely without warming. All of it melts, and its temperature does not change: ΔT = 0.
    • What do they want? Two things: a number, the latent heat it absorbs, and a reason, explain the constant temperature.
  2. Understand

    • Where does the energy go if nothing warms?
    • Ice in a drink sits at 0 °C while it melts, even though heat keeps flowing into it. The heat is doing something else.
    • Warming uses m c ΔT. Here ΔT = 0, so that gives 0 J. But 6000 J did go in.
  3. Reduce

    • So how much of the 6000 J is latent heat? All of the 6000 J: None of the energy warms it, so all 6000 J is latent heat for melting.
    • Where do I start?
    • Every joule in goes somewhere: into warming it, or into melting it.
  4. Solve

    • State the number, then the reason.
    • Warming: 0 J, since ΔT = 0
    • Latent heat Q = 6000 J
  5. Check

    • Is it right?
    • Energy in = energy used
    • 6000 = 0 + 6000 ✓