Step 10 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 10

Follow the worked example. At each stage, explain why the next step is justified.

An ideal transformer has 1000 primary turns and 100 secondary turns. Primary rms voltage is 225 V. Find secondary rms voltage.

An ideal transformer has 1000 primary turns and 100 secondary turns.

The primary rms voltage is 225 V. Find the secondary rms voltage.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Two coils on one iron core. The input coil, the primary, has 1000 turns. The output coil, the secondary, has 100 turns.
  • What goes in? 225 V of ac. rms is the usual way to state an ac voltage, like the 230 V at a socket.
  • Why "ideal"? Ideal means no energy is lost, so the turns rule holds exactly.
  • What do they want? The secondary rms voltage, Vₛ: the voltage coming out, in volts.
Céim

Ordinary Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 10 of 10

Transformers, National Grid & Transmission Efficiency

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Use secondary voltage = v × s/p.

The worked example

An ideal transformer has 1000 primary turns and 100 secondary turns. The primary rms voltage is 225 V. Find the secondary rms voltage.

How the worked example goes

  1. Read

    • What is going on? Two coils on one iron core. The input coil, the primary, has 1000 turns. The output coil, the secondary, has 100 turns.
    • What goes in? 225 V of ac. rms is the usual way to state an ac voltage, like the 230 V at a socket.
    • Why "ideal"? Ideal means no energy is lost, so the turns rule holds exactly.
  2. Understand

    • How does a transformer work?
    • The ac in the primary keeps changing, so it makes a changing magnetic field in the iron core.
    • The core carries that changing field through every turn of both coils. So every turn gets the same voltage: the same volts per turn.
  3. Reduce

    • Which line gives Vₛ on its own? Vₛ = Vₚ × Nₛ/Nₚ: Multiply both sides of Vₛ/Vₚ = Nₛ/Nₚ by Vₚ. Secondary turns on top.
    • Where do I start?
    • Use Vₛ = Vₚ × Nₛ/Nₚ. Turns have no unit, so the answer comes out in volts. Expect less than 225 V.
  4. Solve

    • Put in the values and work it out.
    • Work out 100 ÷ 1000 first: the secondary has a tenth of the turns.
    • Vₛ = Vₚ × Nₛ/Nₚ
  5. Check

    • Is it right?
    • Volts per turn
    • 225 ÷ 1000 = 0.225 and 22.5 ÷ 100 = 0.225 ✓