Step 6 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 6

Follow the worked example. At each stage, explain why the next step is justified.

A current-carrying conductor is initially perpendicular to a uniform magnetic field. Predict the force change when current is reversed while the magnetic field is unchanged.

A wire carries a current. It is at 90° to a uniform magnetic field.

The current is reversed. The field stays the same.

Predict the change in the force on the wire.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A wire with a current crosses a field at 90°. Uniform means the field is the same strength everywhere. The wire feels a force.
  • What changes? The current is reversed: same size, flowing the other way. Not switched off, not made bigger.
  • What stays? The field stays the same: same strength, same direction. Still at 90°.
  • What do they want? The change in the force. A force has a size and a direction, so say what happens to both.
Céim

Ordinary Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 6 of 10

The Motor Effect

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Identify which vector or angle changes.

The worked example

A wire carries a current. It is at 90° to a uniform magnetic field. The current is reversed. The field stays the same. Predict the change in the force on the wire.

How the worked example goes

  1. Read

    • What is going on? A wire with a current crosses a field at 90°. Uniform means the field is the same strength everywhere. The wire feels a force.
    • What changes? The current is reversed: same size, flowing the other way. Not switched off, not made bigger.
    • What stays? The field stays the same: same strength, same direction. Still at 90°.
  2. Understand

    • How do I picture it?
    • Say the field points into the page, drawn ⊗, and the current flows right. No directions are given, so these are our choice.
    • Fleming's left hand rule: first finger field, second finger current, thumb force.
  3. Reduce

    • The current finger turns round; the field finger stays. The thumb? Points the other way: Turn one finger of the left hand rule round and the thumb turns round. The force is reversed.
    • Where do I start?
    • Split it in two. Direction: one thing reversed, so the force reverses. Size: check B, I and l after the change.
  4. Solve

    • Write the direction, then the size.
    • Trap: "reversed" tempts some students to write −B I l or a smaller force. A size is never negative; the reversal is in the direction.
    • Direction
  5. Check

    • Is it right?
    • Made-up values: 0.1 T, 0.1 m
    • 4 A: F = 0.1 × 4 × 0.1 = 0.04 N, up