Step 7 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 7

Follow the worked example. At each stage, explain why the next step is justified.

The coil of a simple DC motor reaches the position where its turning effect would otherwise reverse. Explain how the motor keeps it turning the same way.

In a DC motor, a coil turns in a magnetic field.

At one position, its turning effect would reverse, unless something acts.

Explain what happens as the coil passes that position.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A DC motor: direct current, one way only, from a battery. It drives a coil turning in a magnetic field.
  • What is the turning effect? The turning effect of the pushes on the coil: which way, and how hard, they turn it.
  • Why "unless something acts"? Left alone, the turning would reverse there. A part of the motor stops that. Name it and say how.
  • What do they want? Explain what happens: a chain of reasons, ending with why the coil keeps turning one way.
Céim

Ordinary Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 7 of 10

DC Motors

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Identify the force couple and how its sign changes with orientation.

The worked example

In a DC motor, a coil turns in a magnetic field. At one position, its turning effect would reverse, unless something acts. Explain what happens as the coil passes that position.

How the worked example goes

  1. Read

    • What is going on? A DC motor: direct current, one way only, from a battery. It drives a coil turning in a magnetic field.
    • What is the turning effect? The turning effect of the pushes on the coil: which way, and how hard, they turn it.
    • Why "unless something acts"? Left alone, the turning would reverse there. A part of the motor stops that. Name it and say how.
  2. Understand

    • How do I picture it?
    • Look along the axle. You see the coil's two long sides end-on: current out of the page in one, ⊙, into the page in the other, ⊗.
    • No directions are given, so choose: field left to right. By the left hand rule, the ⊙ side is pushed up and the ⊗ side down.
  3. Reduce

    • The coil swings past vertical, same current. The turning effect? It reverses: The pushes keep their directions, but the sides have crossed over the top. So the coil is turned back.
    • So what must change?
    • Same current: the ⊙ side is still pushed up. But it is now on the right, so the coil is turned back. It would rock to and fro, then stop.
  4. Solve

    • What reverses the current?
    • The split ring commutator: a ring cut in two halves, fixed to the coil. Two brushes press on it and carry the current in.
    • Every half turn, the halves swap brushes. Trap: slip rings are full rings, so they never swap and never reverse the current.
  5. Check

    • Is it right?
    • Fit slip rings instead: no reversal. Past the vertical the coil is turned back, rocks, and stops. So the reversal is needed ✓
    • The turning would reverse every half turn. The split ring has two halves, so it swaps every half turn too ✓