Step 8 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 8

Follow the worked example. At each stage, explain why the next step is justified.

A magnet is moved into a coil connected to a sensitive meter. The meter deflects during the movement but returns to zero when the magnet is held still. Explain the evidence for induction.

A magnet is moved into a coil joined to a sensitive meter.

The meter deflects while the magnet moves. It goes back to zero when the magnet is held still.

Explain why this is evidence for induction.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A magnet is pushed into a coil. The coil is joined to a sensitive meter that shows tiny currents. There is no battery.
  • What is seen first? The needle deflects (moves) while the magnet moves. A current is flowing.
  • What is seen next? The needle goes back to zero when the magnet is still, even though the magnet is inside the coil.
  • What do they want? Explain why this shows induction. No numbers: link each thing seen to its cause.
Céim

Ordinary Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 8 of 10

Changing Magnetic Conditions and Induction

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Changing the magnetic conditions through the coil induces a potential difference.

The worked example

A magnet is moved into a coil joined to a sensitive meter. The meter deflects while the magnet moves. It goes back to zero when the magnet is held still. Explain why this is evidence for induction.

How the worked example goes

  1. Read

    • What is going on? A magnet is pushed into a coil. The coil is joined to a sensitive meter that shows tiny currents. There is no battery.
    • What is seen first? The needle deflects (moves) while the magnet moves. A current is flowing.
    • What is seen next? The needle goes back to zero when the magnet is still, even though the magnet is inside the coil.
  2. Understand

    • Where does the current come from?
    • No battery, yet a current flows. So the magnet and coil together must make a voltage.
    • Making a voltage in a coil with a magnetic field is called induction. That voltage is the induced emf.
  3. Reduce

    • Why does the meter deflect while the magnet moves? The field is changing: As the magnet moves in, more field passes through the coil. That change induces an emf.
    • Where do I start?
    • Take the two stages in turn. For each: is the field through the coil changing? Then what does that make the meter do?
  4. Solve

    • Write the explanation.
    • 1. Moving the magnet in changes the field through the coil.
    • 2. A changing field induces an emf. The closed circuit lets a current flow, so the needle deflects.
  5. Check

    • Is it right?
    • If the magnet alone did it, the meter would keep reading while the magnet sits in the coil. It reads zero ✓
    • Pull the magnet out: the field changes again. The needle deflects, the other way ✓