Step 8 of 8 · Worked example · TEACH

← Light, Optics & Electromagnetic Radiation

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Light, Optics & Electromagnetic Radiation · Step 8

Follow the worked example. At each stage, explain why the next step is justified.

A flat collector of area 7/2 m² is perpendicular to uniform radiation of irradiance 600 W/m². Find incident power, before any efficiency loss.

A flat collector of area 3.5 m² is perpendicular to uniform radiation.

The irradiance is 600 W/m². Find the incident power, before any efficiency loss.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A flat collector of 3.5 m², like a solar panel, sits in sunlight.
  • What is fixed? Irradiance 600 W/m²: the power landing on each square metre facing the radiation.
  • Anything special? Perpendicular: the collector faces the radiation straight on, at 90°. Uniform: every square metre gets the same.
  • What do they want? The incident power P: all the power arriving, in watts, before any efficiency loss, not the useful part.
Céim

Ordinary Level Physics · Light, Optics & Electromagnetic Radiation · Step 8 of 8

Dispersion, Solar Irradiance & Applications

Identify the medium, boundary normal or lens geometry and the observed optical effect.

Why it matters

Use incident power = i × a.

The worked example

A flat collector of area 3.5 m² is perpendicular to uniform radiation. The irradiance is 600 W/m². Find the incident power, before any efficiency loss.

How the worked example goes

  1. Read

    • What is going on? A flat collector of 3.5 m², like a solar panel, sits in sunlight.
    • What is fixed? Irradiance 600 W/m²: the power landing on each square metre facing the radiation.
    • Anything special? Perpendicular: the collector faces the radiation straight on, at 90°. Uniform: every square metre gets the same.
  2. Understand

    • How do I picture it?
    • Mark the collector out in square metres. Each whole square metre receives 600 W.
    • A 3 m² collector would get 600 × 3 = 1800 W. A 4 m² one would get 600 × 4 = 2400 W.
  3. Reduce

    • Irradiance = power ÷ area. So power = ? irradiance × area: Multiply both sides by the area. W/m² × m² = W, a power.
    • Where do I start?
    • irradiance = (P)/(A)
  4. Solve

    • Substitute and multiply.
    • W/m² × m² = W. The m² cancel, so the answer is in watts. Split 3.5 into 3 and 0.5.
    • P = 600 W/m² × 3.5 m²
  5. Check

    • Is it right?
    • Reverse it: irradiance = P ÷ A
    • 2100 ÷ 3.5 = 600 W/m² ✓