Step 5 of 8 · Worked example · TEACH

← Light, Optics & Electromagnetic Radiation

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Light, Optics & Electromagnetic Radiation · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

A beam parallel to the axis is brought to a focus after a lens. Identify the lens/image behaviour and explain with ray directions.

A beam parallel to the axis is brought to a focus after a lens.

Which type of lens is it? Explain using the direction of the rays.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A beam of light rays all travelling parallel to the axis, the line through the middle of the lens. Sunlight arrives like this.
  • What happens to it? Brought to a focus after the lens: on the far side, the rays really meet at one point.
  • What do they want? The type of lens, and the reason, told by which way the rays bend. Nothing to calculate.
Céim

Ordinary Level Physics · Light, Optics & Electromagnetic Radiation · Step 5 of 8

Converging & Diverging Lenses

Identify the medium, boundary normal or lens geometry and the observed optical effect.

Why it matters

Distinguish actual rays from construction extensions.

The worked example

A beam parallel to the axis is brought to a focus after a lens. Which type of lens is it? Explain using the direction of the rays.

How the worked example goes

  1. Read

    • What is going on? A beam of light rays all travelling parallel to the axis, the line through the middle of the lens. Sunlight arrives like this.
    • What happens to it? Brought to a focus after the lens: on the far side, the rays really meet at one point.
    • What do they want? The type of lens, and the reason, told by which way the rays bend. Nothing to calculate.
  2. Understand

    • How do I picture it?
    • Draw three parallel rays going into a lens: one along the axis, one above, one below.
    • A lens bends each ray that goes through it. There are only two ways it can bend a parallel beam.
  3. Reduce

    • The rays meet after the lens. So the focus is: Real, on the far side: The light really meets there, after going through the lens. So the focus is real, on the far side.
    • So which lens?
    • A real focus on the far side means every ray was bent in, towards the axis.
  4. Solve

    • Write the lens and the ray directions.
    • 1. The parallel rays go into the lens.
    • 2. The ray along the axis goes straight through.
  5. Check

    • Could it be diverging?
    • A diverging lens spreads the parallel rays out. They only seem to come from a point on the near side.
    • Spreading rays never meet on the far side. So diverging is ruled out ✓