Step 9 of 11 · Worked example · TEACH

← Forces, Momentum & Fluids

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Forces, Momentum & Fluids · Step 9

Follow the worked example. At each stage, explain why the next step is justified.

A liquid has density 900 kg/m³. Find the pressure increase from its surface to depth 7 m. Use g=10 m/s².

A liquid has density 900 kg/m³.

Find the pressure increase from its surface to a depth of 7 m. Use g = 10 m/s².

Read it once, slowly. Then copy it onto your page.
  • What is given? Density 900 kg/m³: each cubic metre of the liquid has mass 900 kg, a bit less than water. And g = 10 m/s².
  • Where? From its surface down to a depth of 7 m. Depth is measured straight down from the surface.
  • What do they want? The pressure increase: how much more pressure there is at 7 m than at the top. Not the total, so no air pressure is needed.
Céim

Ordinary Level Physics · Forces, Momentum & Fluids · Step 9 of 11

Pressure in Solids & Fluids

Choose the body or system and identify its real interactions, directions and equilibrium conditions.

Why it matters

Use pressure increase = rho × 10 × h.

The worked example

A liquid has density 900 kg/m³. Find the pressure increase from its surface to a depth of 7 m. Use g = 10 m/s².

How the worked example goes

  1. Read

    • What is given? Density 900 kg/m³: each cubic metre of the liquid has mass 900 kg, a bit less than water. And g = 10 m/s².
    • Where? From its surface down to a depth of 7 m. Depth is measured straight down from the surface.
    • What do they want? The pressure increase: how much more pressure there is at 7 m than at the top. Not the total, so no air pressure is needed.
  2. Understand

    • How do I picture it?
    • Picture a tall column of the liquid standing on a 1 m² square at the bottom.
    • Deeper down, more liquid sits on top, pressing down. So the pressure grows with depth.
  3. Reduce

    • Which relationship gives what they ask for? Δp = ρ g h: Density × g is the 9000 Pa each metre adds. Times the depth h gives the whole increase.
    • Write the formula.
    • Pressure increase with depth
  4. Solve

    • Multiply it out.
    • Work out ρg first: it is the 9000 Pa that each metre adds.
    • Δp = ρgh
  5. Check

    • Is it right?
    • Metre by metre: 7 × 9000 = 63000 Pa ✓
    • Units: kg/m³ × m/s² × m = N/m² = Pa ✓