Step 8 of 11 · Worked example · TEACH

← Forces, Momentum & Fluids

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Forces, Momentum & Fluids · Step 8

Follow the worked example. At each stage, explain why the next step is justified.

A uniform rectangular block stands on a level base. Explain the location of its centre of mass and the condition for tipping when it is slowly tilted.

A uniform rectangular block stands on a level base.

Explain where its centre of mass is. Give the condition for tipping when it is slowly tilted.

Read it once, slowly. Then copy it onto your page.
  • What is fixed? Uniform: its mass is spread evenly. Rectangular block: a box shape, the same on both sides of its middle.
  • What happens to it? It is slowly tilted: lifted on one side, a little at a time, never thrown over.
  • What do they want? Two things, in words: where its centre of mass is, and the condition for tipping. No numbers.
Céim

Ordinary Level Physics · Forces, Momentum & Fluids · Step 8 of 11

Centre of mass and stability

Choose the body or system and identify its real interactions, directions and equilibrium conditions.

Why it matters

Symmetry places the centre of mass at the geometric centre of the uniform block.

The worked example

A uniform rectangular block stands on a level base. Explain where its centre of mass is. Give the condition for tipping when it is slowly tilted.

How the worked example goes

  1. Read

    • What is fixed? Uniform: its mass is spread evenly. Rectangular block: a box shape, the same on both sides of its middle.
    • What happens to it? It is slowly tilted: lifted on one side, a little at a time, never thrown over.
    • What do they want? Two things, in words: where its centre of mass is, and the condition for tipping. No numbers.
  2. Understand

    • How do I picture it?
    • Picture a cereal box on a table. Tilt it a little and let go: it rocks back. Tilt it far: it falls over.
    • As you tilt it, the box turns on one bottom edge, the only part still on the table. Call it the pivot edge.
  3. Reduce

    • Tilted slowly on its pivot edge. When does the block tip? Weight line past edge: Once the weight line passes the pivot edge, the weight turns the block over on that edge.
    • Follow the line straight down.
    • Draw a line straight down from the centre of mass. Where it meets the ground decides everything.
  4. Solve

    • Write both answers.
    • Each answer needs its reason, because the question says explain.
    • Uniform and symmetrical, so the centre of mass is at the centre of the block.
  5. Check

    • Is it right?
    • Opposite test: if the weight line stayed inside the edge, the weight would pull the block back onto its base. It would settle, not tip ✓
    • Real life: a tall, narrow box tips after a small tilt. Its edge is close to the weight line ✓