Step 8 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Current Electricity & Circuits · Step 8

Follow the worked example. At each stage, explain why the next step is justified.

Two resistors 8 Ω and 11 Ω are connected in series to an ideal 22 V source. Find current and explain why both resistors carry it.

Resistors of 8 Ω and 11 Ω are in series with an ideal 22 V source.

Find the current and explain why both resistors carry it.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Two resistors, 8 Ω and 11 Ω, in series: one after the other on a single path round the circuit.
  • What drives it? A 22 V source. Ideal means it has no resistance of its own, so the full 22 V goes to the resistors.
  • What do they want? Two things: a number, the current, and a reason, why both resistors carry it.
Céim

Ordinary Level Physics · Current Electricity & Circuits · Step 8 of 11

Series Circuits

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Use current = v/(a+b).

The worked example

Resistors of 8 Ω and 11 Ω are in series with an ideal 22 V source. Find the current and explain why both resistors carry it.

How the worked example goes

  1. Read

    • What is going on? Two resistors, 8 Ω and 11 Ω, in series: one after the other on a single path round the circuit.
    • What drives it? A 22 V source. Ideal means it has no resistance of its own, so the full 22 V goes to the resistors.
    • What do they want? Two things: a number, the current, and a reason, why both resistors carry it.
  2. Understand

    • How do I picture it?
    • Sketch one loop: the 22 V source, then the 8 Ω, then the 11 Ω, then back to the source. No branches.
    • Charge leaves the source, goes through the 8 Ω, then the 11 Ω, and comes back. There is no other way round.
  3. Reduce

    • The same current goes through 8 Ω then 11 Ω. What total resistance does the source see? 8 + 11 = 19 Ω: Each coulomb must get through both, one after the other, so the resistances add.
    • Where do I start?
    • In series, resistances add. Then use Ohm's law for the whole loop: supply p.d. over total resistance.
  4. Solve

    • Add the resistances, then divide.
    • R = 8 + 11 = 19 Ω
    • I = (V)/(R) = (22)/(19)
  5. Check

    • Is it right? Did I answer it?
    • p.d. across each, with the exact 22/19 A
    • V₁ = 8 × 22/19 ≈ 9.26 V, V₂ = 11 × 22/19 ≈ 12.74 V