Step 4 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Current Electricity & Circuits · Step 4

Follow the worked example. At each stage, explain why the next step is justified.

A uniform wire has resistance 7 Ω, length 8 m and cross-sectional area 3/500000 m². Find resistivity.

A uniform wire has resistance 7 Ω, length 8 m and cross sectional area 6 × 10⁻⁶ m².

Find its resistivity.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A wire 8 m long has a resistance of 7 Ω from one end to the other.
  • How thick is it? The cross sectional area is the area of its cut end: 6 × 10⁻⁶ m², or 0.000006 m². Minus six: a tiny area, a thin wire.
  • What does this word tell me? Uniform: the same material and the same thickness all along the wire.
  • What do they want? Its resistivity ρ (say "row"): a number for the material itself, in Ω m. Not the resistance: that is given.
Céim

Ordinary Level Physics · Current Electricity & Circuits · Step 4 of 11

Resistivity

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Rearrange to ρ=RA/L and use area, not diameter, in the formula.

The worked example

A uniform wire has resistance 7 Ω, length 8 m and cross sectional area 6 × 10⁻⁶ m². Find its resistivity.

How the worked example goes

  1. Read

    • What is going on? A wire 8 m long has a resistance of 7 Ω from one end to the other.
    • How thick is it? The cross sectional area is the area of its cut end: 6 × 10⁻⁶ m², or 0.000006 m². Minus six: a tiny area, a thin wire.
    • What does this word tell me? Uniform: the same material and the same thickness all along the wire.
  2. Understand

    • What changes a wire's resistance?
    • Length: a longer wire is harder to push current through. Twice the length, twice the resistance.
    • Thickness: a thicker wire gives the current more room. Twice the area, half the resistance.
  3. Reduce

    • R = ρ l/A. Which line gives ρ? ρ = R A/l: Multiply both sides by A to clear the fraction, then divide both sides by l.
    • Where do I start?
    • Only ρ is unknown, so rearrange the formula to get it on its own.
  4. Solve

    • Put in the numbers.
    • Work with the 7, 6 and 8 first. The × 10⁻⁶ just rides along with the area.
    • ρ = (R A)/(l)
  5. Check

    • Is it right?
    • Work back: R = ρl/A = (5.25 × 10⁻⁶ × 8) ÷ (6 × 10⁻⁶) = 7 Ω, as given ✓
    • Units: Ω × m² ÷ m = Ω m ✓. Trap: resistivity is in ohm metres, not ohms per metre.