Ordinary Level Physics · Current Electricity & Circuits · Step 9 of 11
Parallel Circuits
Trace complete current paths, label measured quantities and identify component behaviour.
Why it matters
Use resistance = a × b/(a+b).
The worked example
Two ideal resistors of 8 Ω and 18 Ω are connected in parallel. Find the equivalent resistance.
How the worked example goes
Read
- What is going on? Two resistors, 8 Ω and 18 Ω. Ideal: each has exactly the resistance stated.
- How are they joined? In parallel: side by side, both joined between the same two points. Two paths for the current. Trap: treating it as series.
- What do they want? The equivalent resistance: one resistor that would do the same job as the pair. No voltage is given, so no currents are asked.
Understand
- How do I picture it?
- Sketch two points, A and B. Join them with the 8 Ω on one branch and the 18 Ω on another.
- Both branches start at A and end at B, so each has the same p.d. across it.
Reduce
- The pair must come out less than 8 Ω. Which rule does that? 1/R = 1/8 + 1/18: Currents add, and each current is V/R. Adding the 1/R's adds the currents for each volt.
- Where do I start?
- The parallel rule: add the reciprocals. A reciprocal is one over the number: the reciprocal of 8 is 1/8.
Solve
- Add the fractions.
- 8 and 18 both go into 72, so use 72 as the common bottom. Trap: adding tops and bottoms, 2/26, is not how fractions add.
- (1)/(R) = (1)/(8) + (1)/(18)
Check
- Is it right? Did I answer it?
- Second route, two resistors: product over sum
- R = (8 × 18)/(8 + 18) = (144)/(26) = (72)/(13) ≈ 5.54 Ω ✓