Step 6 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Current Electricity & Circuits · Step 6

Follow the worked example. At each stage, explain why the next step is justified.

Interpret the device behaviour: A filament lamp’s current increases less than proportionally as voltage rises.

A filament lamp's current increases less than proportionally as the voltage rises.

Interpret the lamp's behaviour.

Read it once, slowly. Then copy it onto your page.
  • What is the device? A filament lamp: an ordinary bulb with a thin coil of metal wire that glows when current flows.
  • What is seen? As the voltage rises, the current rises too, but less than proportionally: double the voltage, and the current goes up by less than double.
  • What do they want? Interpret the lamp's behaviour: say what happens to its resistance, and why. Nothing to calculate.
Céim

Ordinary Level Physics · Current Electricity & Circuits · Step 6 of 11

Non-Ohmic Devices

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Consider the whole tested I–V relationship and the device conditions.

The worked example

A filament lamp's current increases less than proportionally as the voltage rises. Interpret the lamp's behaviour.

How the worked example goes

  1. Read

    • What is the device? A filament lamp: an ordinary bulb with a thin coil of metal wire that glows when current flows.
    • What is seen? As the voltage rises, the current rises too, but less than proportionally: double the voltage, and the current goes up by less than double.
    • What do they want? Interpret the lamp's behaviour: say what happens to its resistance, and why. Nothing to calculate.
  2. Understand

    • How do I picture it?
    • Sketch current against voltage. The straight line is a fixed resistance. The lamp's curve starts on it, then bends away.
    • Made-up readings off the lamp's curve: 2 V gives 1.6 A; 4 V gives 2.4 A. The voltage doubled; the current did not.
  3. Reduce

    • V doubles, and I goes up by less than double. So V ÷ I… it gets bigger: The top of V ÷ I grows faster than the bottom, so the answer gets bigger: the resistance rises.
    • Where do I start?
    • Work out R = V ÷ I at both made-up readings and compare.
  4. Solve

    • Why does the resistance rise?
    • More voltage and more current means more power in the filament. It glows brighter and gets much hotter.
    • In hotter metal the atoms vibrate more. The moving electrons bump into them more often.
  5. Check

    • Is it right? Did I answer it?
    • Suppose R stayed at 1.25 Ω. Then 4 V would give 4 ÷ 1.25 = 3.2 A, double the 1.6 A. The lamp gives less, so R rose ✓
    • Interpret the lamp's behaviour: what happens (resistance rises, non-ohmic) and why (the filament heats up) ✓