Step 11 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Current Electricity & Circuits · Step 11

Follow the worked example. At each stage, explain why the next step is justified.

Diagnose this situation and give the appropriate circuit reasoning: An ideal ammeter is connected directly across a power supply.

An ideal ammeter is connected directly across a power supply.

What goes wrong? Explain using circuit reasoning.

Read it once, slowly. Then copy it onto your page.
  • What is the meter? An ideal ammeter: a meter that measures current. Ideal means perfect: it has no resistance at all, 0 Ω.
  • How is it wired? Directly across a power supply: one lead on each terminal, nothing else in the loop. No lamp, no resistor.
  • What do they want? Two things: what goes wrong, and the circuit reasoning: why, using circuit rules like Ohm's law.
Céim

Ordinary Level Physics · Current Electricity & Circuits · Step 11 of 11

Circuit Modelling, Measurement & Troubleshooting

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Identify open paths, short paths or inappropriate instrument loading.

The worked example

An ideal ammeter is connected directly across a power supply. What goes wrong? Explain using circuit reasoning.

How the worked example goes

  1. Read

    • What is the meter? An ideal ammeter: a meter that measures current. Ideal means perfect: it has no resistance at all, 0 Ω.
    • How is it wired? Directly across a power supply: one lead on each terminal, nothing else in the loop. No lamp, no resistor.
    • What do they want? Two things: what goes wrong, and the circuit reasoning: why, using circuit rules like Ohm's law.
  2. Understand

    • How do I picture it?
    • Sketch the supply. Draw a wire from one terminal to the ammeter, and from the ammeter back to the other terminal.
    • That is the whole circuit: one loop with the supply and the meter. Nothing else is there to hold back the current.
  3. Reduce

    • The loop is the supply plus 0 Ω. The current is… a very large current: With nothing to limit it, the current becomes very large, as the made-up numbers showed.
    • Where do I start?
    • Swap the ammeter for its resistance, 0 Ω. Then use Ohm's law on the whole loop.
  4. Solve

    • What goes wrong?
    • 1. The ammeter joins the terminals with 0 Ω. This is a short circuit.
    • 2. I = V ÷ R. As R gets near 0, I gets very large.
  5. Check

    • Is it right? Did I answer it?
    • Made-up numbers again: 12 V, 6 Ω lamp, ammeter in series. R = 6 + 0 = 6 Ω, so I = 2 A: the meter changes nothing ✓
    • Take the lamp away and R = 0: the circuit in the question. Nothing limits the current ✓