Step 6 of 13 · Worked example · TEACH

← Atomic, Quantum & Nuclear Physics

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Physics · Atomic, Quantum & Nuclear Physics · Step 6

Follow the worked example. At each stage, explain why the next step is justified.

Describe how an X-ray tube uses an electron beam and metal target to produce radiation.

Describe how an X-ray tube uses an electron beam and a metal target to produce radiation.

Read it once, slowly. Then copy it onto your page.
  • What is going on? An X-ray tube makes X-rays: it produces radiation.
  • What must I use? Two parts are named: the electron beam and the metal target. Both must appear in the answer.
  • What do they want? Describe how: the steps in order. Nothing to calculate.
Céim

Ordinary Level Physics · Atomic, Quantum & Nuclear Physics · Step 6 of 13

X-Ray Production & Applications

Identify the evidence and distinguish individual particles, energy changes and statistical measurements.

Why it matters

A heated cathode emits electrons.

The worked example

Describe how an X-ray tube uses an electron beam and a metal target to produce radiation.

How the worked example goes

  1. Read

    • What is going on? An X-ray tube makes X-rays: it produces radiation.
    • What must I use? Two parts are named: the electron beam and the metal target. Both must appear in the answer.
    • What do they want? Describe how: the steps in order. Nothing to calculate.
  2. Understand

    • What are X-rays?
    • X rays are electromagnetic waves, like light, but each photon carries far more energy.
    • Fast electrons carry kinetic energy, the energy of movement. When they hit the target and stop suddenly, that energy has to go somewhere.
  3. Reduce

    • Where do I start?
    • Follow one electron through the tube, in three stages.
    • 1. Where do the electrons come from?
  4. Solve

    • What does the high voltage across the tube do? Speeds up electrons: The high voltage pulls the electrons from the cathode to the target, so they gain kinetic energy.
    • Write the description.
    • 1. A heated cathode gives out electrons: thermionic emission.
  5. Check

    • Is it right?
    • Energy shares: 1% + 99% = 100%. All the kinetic energy is counted ✓
    • If all of it became X-rays, the target would stay cool. Real targets get very hot. Tungsten is used because it melts only above 3000 °C ✓