Step 7 of 8 · Worked example · TEACH

← Temperature, Heat & Thermal Energy

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Temperature, Heat & Thermal Energy · Step 7

Follow the worked example. At each stage, explain why the next step is justified.

A wall has area 11 m² and U-value 1/15 W/(m² K). The indoor-outdoor temperature difference is 16 K. Find steady heat-loss power.

A wall has area 11 m² and U value 1/15 W/(m² K).

Indoors and outdoors differ by 16 K. Find the steady heat loss power.

Read it once, slowly. Then copy it onto your page.
  • How big is the wall? Area 11 m²: A = 11 m².
  • How well does it insulate? Its U value 1/15 W/(m² K): U = 1/15 W/(m² K). Keep it as a fraction.
  • What drives the loss? Indoors and outdoors differ by 16 K: ΔT = 16 K, warm inside, cold outside.
  • What do they want? The steady heat loss power: the temperatures hold fixed, so the energy lost each second, P, is fixed. Watts.
Céim

Higher Level Physics · Temperature, Heat & Thermal Energy · Step 7 of 8

Insulation & U-Values

Identify the system, temperature changes, changes of state and all energy transfers.

Why it matters

Use heat-loss power = u × a × d.

The worked example

A wall has area 11 m² and U value 1/15 W/(m² K). Indoors and outdoors differ by 16 K. Find the steady heat loss power.

How the worked example goes

  1. Read

    • How big is the wall? Area 11 m²: A = 11 m².
    • How well does it insulate? Its U value 1/15 W/(m² K): U = 1/15 W/(m² K). Keep it as a fraction.
    • What drives the loss? Indoors and outdoors differ by 16 K: ΔT = 16 K, warm inside, cold outside.
  2. Understand

    • What does a U value mean?
    • Read the unit as a sentence: watts lost, per square metre of wall, per kelvin of difference across it.
    • So 1 m² of this wall, with a 1 K difference, loses 1/15 of a watt: 1/15 J each second.
  3. Reduce

    • Which relation gives the power P? P = U A ΔT: U is per m² per kelvin, so multiply by both A and ΔT to get watts.
    • Where do I start?
    • The unit agrees: W/(m² K) × m² × K = W. Leave out any one factor and the answer is not in watts.
  4. Solve

    • Multiply all three.
    • Round only the last line, to 3 significant figures.
    • P = U A ΔT
  5. Check

    • Is it right?
    • Reverse: U = P ÷ (A ΔT)
    • 11.733… ÷ 176 = 0.0666… = 1/15 ✓