Step 6 of 8 · Worked example · TEACH

← Temperature, Heat & Thermal Energy

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Temperature, Heat & Thermal Energy · Step 6

Follow the worked example. At each stage, explain why the next step is justified.

The far end of a metal rod warms when the near end is heated, without bulk flow of metal. Identify the relevant transfer mechanism and justify it.

The far end of a metal rod warms when the near end is heated. There is no bulk flow of metal.

Identify the transfer mechanism and justify it.

Read it once, slowly. Then copy it onto your page.
  • What is it? A metal rod: a solid. Its particles are held in place.
  • What happens? The far end warms when the near end is heated. So energy travels along the rod, from the hot end to the cool end.
  • What is ruled out? No bulk flow of metal: the metal itself does not move along the rod. This is the key clue.
  • What do they want? Two things: name the transfer mechanism, and justify it with the evidence. Nothing to calculate.
Céim

Higher Level Physics · Temperature, Heat & Thermal Energy · Step 6 of 8

Conduction, Convection & Radiation

Identify the system, temperature changes, changes of state and all energy transfers.

Why it matters

Identify the physical route taken by the energy.

The worked example

The far end of a metal rod warms when the near end is heated. There is no bulk flow of metal. Identify the transfer mechanism and justify it.

How the worked example goes

  1. Read

    • What is it? A metal rod: a solid. Its particles are held in place.
    • What happens? The far end warms when the near end is heated. So energy travels along the rod, from the hot end to the cool end.
    • What is ruled out? No bulk flow of metal: the metal itself does not move along the rod. This is the key clue.
  2. Understand

    • How do I picture it?
    • A metal spoon left in hot soup: soon the handle is too hot to hold, yet no soup and no metal has moved up the handle.
    • The rod is the same. Heat the near end, wait, and the far end warms. Energy moves; the metal stays put.
  3. Reduce

    • "No bulk flow of metal." Which mechanism does that rule out? Convection: Convection needs a fluid moving in bulk. The solid metal does not flow.
    • Which of the other two fits?
    • Radiation: the rod's surface does give off infrared, but waves leaving the surface do not carry energy along inside the solid.
  4. Solve

    • Name it, then give the reason.
    • Write the name, then tie the reason to the clues the question gave you.
    • Mechanism: conduction.
  5. Check

    • Is it right?
    • Contrast: water heated from below. Warm water rises, cool water sinks. The water moves in bulk: convection.
    • Contrast: sunlight crossing empty space. No material at all: radiation.