Step 10 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 10

Follow the worked example. At each stage, explain why the next step is justified.

An ideal transformer has 600 primary turns and 60 secondary turns. Primary rms voltage is 205 V. Find secondary rms voltage.

An ideal transformer has 600 primary turns and 60 secondary turns.

The primary rms voltage is 205 V. Find the secondary rms voltage.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Two coils on one iron core. The input coil, the primary, has 600 turns. The output coil, the secondary, has 60 turns.
  • What goes in? An ac voltage of 205 V rms. rms is the steady value that would deliver the same power as this alternating one.
  • Why "ideal"? Ideal means no energy is lost in the transformer: power in = power out, and the turns rule holds exactly.
  • What do they want? The secondary rms voltage, Vₛ: the voltage coming out, in volts.
Céim

Higher Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 10 of 10

Transformers, National Grid & Transmission Efficiency

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Use secondary voltage = v × s/p.

The worked example

An ideal transformer has 600 primary turns and 60 secondary turns. The primary rms voltage is 205 V. Find the secondary rms voltage.

How the worked example goes

  1. Read

    • What is going on? Two coils on one iron core. The input coil, the primary, has 600 turns. The output coil, the secondary, has 60 turns.
    • What goes in? An ac voltage of 205 V rms. rms is the steady value that would deliver the same power as this alternating one.
    • Why "ideal"? Ideal means no energy is lost in the transformer: power in = power out, and the turns rule holds exactly.
  2. Understand

    • How does a transformer work?
    • The ac in the primary keeps changing, so it makes a changing flux in the iron core.
    • The core carries that same changing flux through every turn of both coils.
  3. Reduce

    • Which relation links the voltages and the turns? Vₛ/Vₚ = Nₛ/Nₚ: Voltages are in the same ratio as turns. Both sides are secondary over primary.
    • Where do I start?
    • Use Vₚ/Vₛ = Nₚ/Nₛ: primary over secondary on both sides. The turns side then becomes one number.
  4. Solve

    • Simplify the turns, then solve.
    • 600 ÷ 60 = 10: the primary has ten times the turns. Multiply both sides by Vₛ, then divide by 10.
    • (Vₚ)/(Vₛ) = (Nₚ)/(Nₛ)
  5. Check

    • Is it right?
    • Second route: Vₛ = Vₚ × Nₛ/Nₚ
    • 205 × (60)/(600) = 205 × 0.1 = 20.5 V ✓