Step 8 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 8

Follow the worked example. At each stage, explain why the next step is justified.

A uniform magnetic field 1/5 T makes angle 60° with the normal to a flat area 3/100 m². Find magnetic flux through one turn.

A uniform magnetic field of 0.2 T makes an angle of 60° with the normal to a flat area.

The area is 0.03 m². Find the magnetic flux through one turn.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A uniform field of 0.2 T: the same strength and direction everywhere, passing a flat loop of wire.
  • What is the loop? One turn enclosing a flat area of 0.03 m², about half an A4 page.
  • Which angle? 60° with the normal. The normal is the line at 90° to the area. Trap: reading it as 60° to the surface.
  • What do they want? The magnetic flux through one turn: how much field passes through the loop, in webers, Wb.
Céim

Higher Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 8 of 10

Magnetic Flux & Electromagnetic Induction

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Use magnetic flux = b × a/2.

The worked example

A uniform magnetic field of 0.2 T makes an angle of 60° with the normal to a flat area. The area is 0.03 m². Find the magnetic flux through one turn.

How the worked example goes

  1. Read

    • What is going on? A uniform field of 0.2 T: the same strength and direction everywhere, passing a flat loop of wire.
    • What is the loop? One turn enclosing a flat area of 0.03 m², about half an A4 page.
    • Which angle? 60° with the normal. The normal is the line at 90° to the area. Trap: reading it as 60° to the surface.
  2. Understand

    • How do I picture it?
    • Think of rain through an open window. Window facing the rain: all of it comes through. Window edge-on: none does.
    • Field through a loop works the same way. Draw the area edge-on, its normal sticking straight out, and B at 60° to that normal.
  3. Reduce

    • θ = 60° from the normal. Which relation gives the flux? Φ = B A cos θ: Only the part of B along the normal, B cos θ, passes through the area.
    • Where do I start?
    • List the three values in SI units. Tesla and square metres give webers directly.
  4. Solve

    • Multiply, then take the cosine.
    • cos 60° = 0.5: the field along the normal is half the field. Multiply 0.2 by 0.03 first, then by 0.5.
    • Φ = B A cos θ
  5. Check

    • Is it right?
    • Second route: field along the normal first
    • B cos 60° = (0.2)(0.5) = 0.1 T