Step 5 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

A straight wire of active length 1/10 m carries current 4 A perpendicular to a uniform magnetic field 1/10 T. Find magnetic force magnitude.

A straight wire has 0.1 m of its length in a uniform magnetic field of 0.1 T.

It carries a current of 4 A at right angles to the field.

Find the size of the magnetic force on the wire.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A straight wire runs through a magnetic field, but only 0.1 m of its length is in it. That part is the active length l.
  • What field? Uniform, 0.1 T: the same strength everywhere the wire is in it. A fairly weak field.
  • What current? 4 A, flowing at right angles to the field: the angle θ between them is 90°.
  • What do they want? The size of the force on the wire, in newtons. No direction asked.
Céim

Higher Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 5 of 10

Force on a Current-Carrying Conductor

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Use force magnitude = b × i × l.

The worked example

A straight wire has 0.1 m of its length in a uniform magnetic field of 0.1 T. It carries a current of 4 A at right angles to the field. Find the size of the magnetic force on the wire.

How the worked example goes

  1. Read

    • What is going on? A straight wire runs through a magnetic field, but only 0.1 m of its length is in it. That part is the active length l.
    • What field? Uniform, 0.1 T: the same strength everywhere the wire is in it. A fairly weak field.
    • What current? 4 A, flowing at right angles to the field: the angle θ between them is 90°.
  2. Understand

    • How do I picture it?
    • Draw the field lines, then the wire across them at 90°, carrying 4 A. Field up and current right are our choice; no directions are given.
    • A current is moving charge. Each moving charge in the field gets a sideways push, so the wire as a whole is pushed.
  3. Reduce

    • At 90°, which relation gives the force? F = B I l: At 90°, sin θ = 1, so the force is field × current × active length.
    • Where do I start?
    • θ = 90° and sin 90° = 1, so the sine drops out: F = B I l.
  4. Solve

    • Multiply, one pair at a time.
    • Write the full rule, put in the values, then multiply. Trap: leaving out l or I.
    • F = B I l sin θ
  5. Check

    • Is it right?
    • Units: 1 T = 1 N/(A m)
    • (N/(A m))(A)(m) = N ✓