Step 7 of 10 · Worked example · TEACH

← Magnetism, Motors, Induction & Electricity Supply

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Magnetism, Motors, Induction & Electricity Supply · Step 7

Follow the worked example. At each stage, explain why the next step is justified.

The coil of a simple DC motor reaches the position where its turning effect would otherwise reverse. Explain how the motor keeps it turning the same way.

In a DC motor, a coil turns in a magnetic field.

At one position its turning effect, or torque, would otherwise reverse.

Explain what happens as the coil passes that position.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A DC motor: direct current, one way only, from a battery. It drives a coil turning in a magnetic field.
  • What is torque? The turning effect of the forces on the coil. It decides which way the coil is turned.
  • Why "would otherwise"? Left alone, the torque would reverse there. Something in the motor stops that. Name it and explain how.
  • What do they want? Explain what happens: a chain of reasons, from the forces on the coil to why it keeps turning one way.
Céim

Higher Level Physics · Magnetism, Motors, Induction & Electricity Supply · Step 7 of 10

DC Motors

State the viewing direction and distinguish field, current, motion and changes over time.

Why it matters

Identify the force couple and how its sign changes with orientation.

The worked example

In a DC motor, a coil turns in a magnetic field. At one position its turning effect, or torque, would otherwise reverse. Explain what happens as the coil passes that position.

How the worked example goes

  1. Read

    • What is going on? A DC motor: direct current, one way only, from a battery. It drives a coil turning in a magnetic field.
    • What is torque? The turning effect of the forces on the coil. It decides which way the coil is turned.
    • Why "would otherwise"? Left alone, the torque would reverse there. Something in the motor stops that. Name it and explain how.
  2. Understand

    • How do I picture it?
    • Look along the coil's axle. You see its two long sides end-on: current out of the page in one, ⊙, into the page in the other, ⊗.
    • No directions are given, so choose: field left to right, ⊙ side upper left. By the left hand rule, the ⊙ side is pushed up and the ⊗ side down.
  3. Reduce

    • The coil passes the vertical with the same current. The torque? Reverses its sense: The forces point the same way as before, but the sides have crossed over, so the turning effect is reversed.
    • Why would it turn back?
    • Same current: the ⊙ side is still pushed up, the ⊗ side still down. But the sides have crossed over the top.
  4. Solve

    • What reverses the current?
    • The split ring commutator: a ring cut into two halves, fixed to the coil and turning with it. Two carbon brushes press on it.
    • Each half turn, the two halves swap brushes. So the current in the coil reverses, right at the vertical.
  5. Check

    • Is it right?
    • Fit slip rings instead: no reversal. Past the vertical the coil is turned back, rocks, and settles. So the reversal is needed ✓
    • The torque would reverse every 180°. The split ring has two halves, so it swaps every 180° ✓