Step 2 of 9 · Worked example · TEACH

← Light, Optics & Electromagnetic Radiation

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Light, Optics & Electromagnetic Radiation · Step 2

Follow the worked example. At each stage, explain why the next step is justified.

Normally incident monochromatic light gives a first-order maximum at 30° from a diffraction grating with spacing 1.2 micrometres. Use nλ = d sinθ to determine wavelength.

Monochromatic light falls normally on a diffraction grating of spacing 1.2 micrometres.

The first order maximum is at 30°. Use nλ = d sin θ to find the wavelength.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Light of one colour, one wavelength (monochromatic), hits a grating head on: normally means at 90° to its surface.
  • What is fixed? A grating is thousands of slits side by side. The gap from one slit to the next is d = 1.2 μm. μ means micro.
  • What else? First order: the first bright beam out from the middle, so n = 1. Its angle, 30°, is measured from the normal.
  • What do they want? The wavelength λ, and they hand you the equation: nλ = d sin θ.
Céim

Higher Level Physics · Light, Optics & Electromagnetic Radiation · Step 2 of 9

Measuring light wavelength

Identify the medium, boundary normal or lens geometry and the observed optical effect.

Why it matters

Use order n = 1 and sin30° = 0.5.

The worked example

Monochromatic light falls normally on a diffraction grating of spacing 1.2 micrometres. The first order maximum is at 30°. Use nλ = d sin θ to find the wavelength.

How the worked example goes

  1. Read

    • What is going on? Light of one colour, one wavelength (monochromatic), hits a grating head on: normally means at 90° to its surface.
    • What is fixed? A grating is thousands of slits side by side. The gap from one slit to the next is d = 1.2 μm. μ means micro.
    • What else? First order: the first bright beam out from the middle, so n = 1. Its angle, 30°, is measured from the normal.
  2. Understand

    • How do I picture it?
    • The light comes up through the grating. Most goes straight on, along the normal: that is the middle bright spot, n = 0.
    • Bright beams also leave at set angles either side. The first one out, the first order, is at 30° from the normal.
  3. Reduce

    • n λ = d sin θ. Write λ on its own. λ = d sin θ ÷ n: λ is multiplied by n. Divide both sides by n and λ is on its own.
    • Where do I start?
    • One equation links all four: n, λ, d and θ. Three are known, so it gives λ.
  4. Solve

    • Put d in metres first.
    • Micro, μ, means a millionth: 10⁻⁶. Trap: reading it as milli, 10⁻³. That makes λ a thousand times too big.
    • d = 1.2 μm = 1.2 × 10⁻⁶ m
  5. Check

    • Is it right?
    • Put it back: sin θ = n λ ÷ d
    • (1 × 6.0 × 10⁻⁷)/(1.2 × 10⁻⁶) = 0.5