Step 9 of 9 · Worked example · TEACH

← Light, Optics & Electromagnetic Radiation

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Light, Optics & Electromagnetic Radiation · Step 9

Follow the worked example. At each stage, explain why the next step is justified.

A flat collector of area 3/2 m² is perpendicular to uniform radiation of irradiance 520 W/m². Find incident power, before any efficiency loss.

A flat collector of area 1.5 m² is perpendicular to uniform radiation.

The irradiance is 520 W/m². Find the incident power, before any efficiency loss.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A flat collector of 1.5 m², like a solar panel, sits in sunlight or other radiation.
  • What is fixed? Irradiance 520 W/m²: the power landing on each square metre facing the radiation.
  • Anything special? Perpendicular: the collector faces the radiation head on. Uniform: every square metre gets the same.
  • What do they want? The incident power P: all the power arriving, in watts, before any efficiency loss, not the useful output.
Céim

Higher Level Physics · Light, Optics & Electromagnetic Radiation · Step 9 of 9

Dispersion, Solar Irradiance & Applications

Identify the medium, boundary normal or lens geometry and the observed optical effect.

Why it matters

Use incident power = i × a.

The worked example

A flat collector of area 1.5 m² is perpendicular to uniform radiation. The irradiance is 520 W/m². Find the incident power, before any efficiency loss.

How the worked example goes

  1. Read

    • What is going on? A flat collector of 1.5 m², like a solar panel, sits in sunlight or other radiation.
    • What is fixed? Irradiance 520 W/m²: the power landing on each square metre facing the radiation.
    • Anything special? Perpendicular: the collector faces the radiation head on. Uniform: every square metre gets the same.
  2. Understand

    • How do I picture it?
    • Mark the collector out in square metres. Each whole square metre receives 520 W.
    • A 1 m² collector would get 520 W. A 2 m² one would get 1040 W.
  3. Reduce

    • Irradiance = power ÷ area. So power = ? irradiance × area: Multiply both sides by the area. W/m² × m² = W, a power.
    • Where do I start?
    • The definition of irradiance links all three. Two are known, so it gives P.
  4. Solve

    • Substitute and multiply.
    • W/m² × m² = W. The m² cancel, so the answer is in watts.
    • P = irradiance × A
  5. Check

    • Is it right?
    • Reverse it: irradiance = P ÷ A
    • 780 ÷ 1.5 = 520 W/m² ✓