Step 9 of 12 · Worked example · TEACH

← Forces, Momentum & Fluids

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Forces, Momentum & Fluids · Step 9

Follow the worked example. At each stage, explain why the next step is justified.

A liquid has density 820 kg/m³. Find the pressure increase from its surface to depth 3 m. Use g=10 m/s².

A liquid has density 820 kg/m³.

Find the pressure increase from its surface to a depth of 3 m. Use g = 10 m/s².

Read it once, slowly. Then copy it onto your page.
  • What is given? Density 820 kg/m³: each cubic metre of the liquid has mass 820 kg, a bit less than water. And g = 10 m/s².
  • Where? From its surface down to a depth of 3 m. Depth is measured straight down from the surface.
  • What do they want? The pressure increase: how much more pressure there is at 3 m than at the top. Not the total, so no air pressure is needed.
Céim

Higher Level Physics · Forces, Momentum & Fluids · Step 9 of 12

Pressure in Solids & Fluids

Contact pressure is force per unit area, while pressure in a liquid at rest increases with depth because of the liquid's weight.

Why it matters

Distinguishing contact pressure, pressure increase and absolute pressure prevents you from choosing the wrong relationship or omitting surface pressure.

The worked example

A liquid has density 820 kg/m³. Find the pressure increase from its surface to a depth of 3 m. Use g = 10 m/s².

How the worked example goes

  1. Read

    • What is given? Density 820 kg/m³: each cubic metre of the liquid has mass 820 kg, a bit less than water. And g = 10 m/s².
    • Where? From its surface down to a depth of 3 m. Depth is measured straight down from the surface.
    • What do they want? The pressure increase: how much more pressure there is at 3 m than at the top. Not the total, so no air pressure is needed.
  2. Understand

    • How do I picture it?
    • Picture a tall column of the liquid standing on a 1 m² square at the bottom.
    • Every layer presses down on the layers below. Deeper down, more liquid sits on top, so the pressure grows.
  3. Reduce

    • Which relationship gives what they ask for? Δp = ρ g h: The increase from the surface down to depth h is ρgh: the weight of the column above, per square metre.
    • Why ρgh?
    • In letters: a column of area A and height h has mass ρAh, so its weight is ρAhg.
  4. Solve

    • Multiply it out.
    • Work out ρg first: it is the 8200 Pa that each metre adds.
    • Δp = ρgh
  5. Check

    • Is it right?
    • Metre by metre: 3 × 8200 = 24600 Pa ✓
    • Units: kg/m³ × m/s² × m = kg/(m s²) = N/m² = Pa ✓