Step 8 of 12 · Worked example · TEACH

← Forces, Momentum & Fluids

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Forces, Momentum & Fluids · Step 8

Follow the worked example. At each stage, explain why the next step is justified.

A uniform rectangular block stands on a level base. Explain the location of its centre of mass and the condition for tipping when it is slowly tilted.

A uniform rectangular block stands on a level base.

Explain where its centre of mass is, and the condition for tipping when it is slowly tilted.

Read it once, slowly. Then copy it onto your page.
  • What is fixed? Uniform: its mass is spread evenly. Rectangular block: a box shape, the same on both sides of its middle.
  • What happens to it? It is slowly tilted: lifted on one side, a little at a time, so it is never thrown over.
  • What do they want? Two things, explained in words: where its centre of mass is, and the condition for tipping. No numbers.
Céim

Higher Level Physics · Forces, Momentum & Fluids · Step 8 of 12

Centre of mass and stability

The position of the centre of mass determines whether weight produces a restoring or toppling moment about a support edge.

Why it matters

This explains why a wide base and a low centre of mass help prevent objects from overturning.

The worked example

A uniform rectangular block stands on a level base. Explain where its centre of mass is, and the condition for tipping when it is slowly tilted.

How the worked example goes

  1. Read

    • What is fixed? Uniform: its mass is spread evenly. Rectangular block: a box shape, the same on both sides of its middle.
    • What happens to it? It is slowly tilted: lifted on one side, a little at a time, so it is never thrown over.
    • What do they want? Two things, explained in words: where its centre of mass is, and the condition for tipping. No numbers.
  2. Understand

    • How do I picture it?
    • Picture a cereal box on a table. Tilt it a little and let go: it rocks back. Tilt it far: it falls over.
    • As you tilt it, the box turns about one bottom edge, the only part still on the table. Call it the pivot edge.
  3. Reduce

    • Tilted slowly about its pivot edge. When does the block tip? Line of W past edge: Once the weight line passes the pivot edge, the weight turns the block over about that edge.
    • Write the condition.
    • Weight line inside the pivot edge: it settles back.
  4. Solve

    • Write both answers.
    • Each answer needs its reason, because the question says explain.
    • Uniform and symmetrical, so the centre of mass is at the geometric centre.
  5. Check

    • Is it right?
    • Opposite test: if the weight line stayed inside the edge, its moment would turn the block back. It would settle, not tip ✓
    • Real life: a tall, narrow box tips sooner than a low, wide one. Its centre is high and its edge close in ✓