Step 7 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Current Electricity & Circuits · Step 7

Follow the worked example. At each stage, explain why the next step is justified.

Explain n-type and p-type doping in terms of majority carriers and state whether the bulk material must acquire a net positive or negative charge.

Explain n type and p type doping in terms of majority carriers.

State whether the bulk material must gain a net positive or negative charge.

Read it once, slowly. Then copy it onto your page.
  • What do they want first? Two explanations: what n type doping does, and what p type doping does.
  • In what terms? Majority carriers: the moving charges there are most of, so they carry most of the current.
  • And then? Decide whether the bulk material, the whole piece of doped crystal, must gain a net positive or negative charge. The question suggests it must. Test that.
  • Anything to calculate? No. Everything is decided by counting outer electrons and counting charge.
Céim

Higher Level Physics · Current Electricity & Circuits · Step 7 of 11

Semiconductors and junctions

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Donor doping provides mobile electrons as majority carriers in n-type material.

The worked example

Explain n type and p type doping in terms of majority carriers. State whether the bulk material must gain a net positive or negative charge.

How the worked example goes

  1. Read

    • What do they want first? Two explanations: what n type doping does, and what p type doping does.
    • In what terms? Majority carriers: the moving charges there are most of, so they carry most of the current.
    • And then? Decide whether the bulk material, the whole piece of doped crystal, must gain a net positive or negative charge. The question suggests it must. Test that.
  2. Understand

    • How do I picture pure silicon?
    • A silicon atom has 4 outer electrons. Each one pairs with a neighbour's to make a bond, so every atom has 4 bonds.
    • With every outer electron locked in a bond, very few charges are free to move. Pure silicon conducts poorly.
  3. Reduce

    • Where do I start?
    • Two tests answer all three asks.
    • Test 1: dopant's outer electrons against silicon's 4. Spare electron or hole?
  4. Solve

    • What does phosphorus give?
    • Phosphorus has 5 outer electrons. 4 of them bond with silicon.
    • The 5th is loosely held and becomes a free electron.
  5. Check

    • Is it right?
    • Count the charge of one dopant atom
    • phosphorus: (+15) + (−15) = 0 ✓