Step 6 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Current Electricity & Circuits · Step 6

Follow the worked example. At each stage, explain why the next step is justified.

Interpret the device behaviour: A filament lamp’s current increases less than proportionally as voltage rises.

A filament lamp's current increases less than proportionally as the voltage rises.

Interpret the device's behaviour.

Read it once, slowly. Then copy it onto your page.
  • What is the device? A filament lamp: a thin coil of metal wire that glows when current flows through it.
  • What is seen? As the voltage rises, the current rises too, but less than proportionally: double the p.d. and the current goes up by less than double.
  • What do they want? Interpret the device's behaviour: say what is happening to the lamp's resistance, and why. Nothing to calculate.
Céim

Higher Level Physics · Current Electricity & Circuits · Step 6 of 11

Non-Ohmic Devices

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Consider the whole tested I–V relationship and the device conditions.

The worked example

A filament lamp's current increases less than proportionally as the voltage rises. Interpret the device's behaviour.

How the worked example goes

  1. Read

    • What is the device? A filament lamp: a thin coil of metal wire that glows when current flows through it.
    • What is seen? As the voltage rises, the current rises too, but less than proportionally: double the p.d. and the current goes up by less than double.
    • What do they want? Interpret the device's behaviour: say what is happening to the lamp's resistance, and why. Nothing to calculate.
  2. Understand

    • How do I picture it?
    • Sketch current against p.d. The straight line is what a constant resistance would give. The lamp's curve starts on it, then bends away.
    • The lamp's curve bends toward the V axis: each extra volt buys less extra current than the one before.
  3. Reduce

    • V rises, and I rises by a smaller factor. So V/I… increases: The top of V/I grows by a bigger factor than the bottom, so the fraction gets bigger: the resistance rises.
    • Where do I start?
    • Compare R = V/I at a low p.d. and at a high p.d.
  4. Solve

    • Why does the resistance rise?
    • As V and I both rise, the power P = VI in the filament rises. It glows brighter and gets much hotter.
    • In a hotter metal the atoms vibrate more. The moving electrons collide with them more often.
  5. Check

    • Is it right?
    • Suppose R stayed constant. Then I = V/R: double V, double I, a straight line through the origin.
    • That is not what is seen, so R cannot be constant ✓