Step 5 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Current Electricity & Circuits · Step 5

Follow the worked example. At each stage, explain why the next step is justified.

An ohmic device at constant temperature has current 2 A at 10 V and current 4 A at 20 V. Find resistance from the slope of V against I.

An ohmic device at constant temperature carries 2 A at 10 V and 4 A at 20 V.

Find its resistance from the slope of the graph of V against I.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Two readings of the same device: 2 A at 10 V, then 4 A at 20 V.
  • What does this phrase give me? Ohmic, at constant temperature: the resistance stays the same, so current is proportional to p.d.
  • Which way round is the graph? V against I: V goes up the side, I goes along the bottom. Trap: drawing it the other way round.
  • What do they want? Its resistance, in ohms, found from the slope of that graph.
Céim

Higher Level Physics · Current Electricity & Circuits · Step 5 of 11

I–V Characteristics

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Use resistance = (v2-v1)/(i2-i1).

The worked example

An ohmic device at constant temperature carries 2 A at 10 V and 4 A at 20 V. Find its resistance from the slope of the graph of V against I.

How the worked example goes

  1. Read

    • What is going on? Two readings of the same device: 2 A at 10 V, then 4 A at 20 V.
    • What does this phrase give me? Ohmic, at constant temperature: the resistance stays the same, so current is proportional to p.d.
    • Which way round is the graph? V against I: V goes up the side, I goes along the bottom. Trap: drawing it the other way round.
  2. Understand

    • How do I picture it?
    • Plot the two readings with I across and V up. Ohmic, so the line is straight and passes through the origin.
    • Double the current, 2 to 4 A, and the p.d. doubles too, 10 to 20 V. That is what proportional looks like.
  3. Reduce

    • V is up the side, I is along the bottom. Which is the slope? (20 − 10) ÷ (4 − 2): Slope is rise over run: the change in V, the vertical axis, over the change in I, the horizontal axis.
    • Where do I start?
    • Use the slope formula with the two points, V values on top because V is the vertical axis.
  4. Solve

    • Rise over run.
    • The p.d. rises 10 V while the current rises 2 A.
    • R = (V₂ − V₁)/(I₂ − I₁)
  5. Check

    • Is it right?
    • Each reading alone: 10 ÷ 2 = 5 Ω and 20 ÷ 4 = 5 Ω. Same as the slope ✓
    • That match is what ohmic means: V/I is the same at every point on the line ✓