Step 1 of 11 · Worked example · TEACH

← Current Electricity & Circuits

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Physics · Current Electricity & Circuits · Step 1

Follow the worked example. At each stage, explain why the next step is justified.

A steady current 3/2 A flows for 25 s. Find charge passing a cross-section.

A steady current of 1.5 A flows for 25 s.

Find the charge that passes a cross section of the wire.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A current of 1.5 A flows in a wire for 25 s. Both numbers are given, with units.
  • What does this word give me? Steady: the current stays at 1.5 A for the whole 25 s. It does not rise or fall.
  • What do they want? The charge that passes a cross section: how much charge crosses one slice of the wire in that time, in coulombs.
Céim

Higher Level Physics · Current Electricity & Circuits · Step 1 of 11

Current & Charge Flow

Trace complete current paths, label measured quantities and identify component behaviour.

Why it matters

Use charge = i × t.

The worked example

A steady current of 1.5 A flows for 25 s. Find the charge that passes a cross section of the wire.

How the worked example goes

  1. Read

    • What is going on? A current of 1.5 A flows in a wire for 25 s. Both numbers are given, with units.
    • What does this word give me? Steady: the current stays at 1.5 A for the whole 25 s. It does not rise or fall.
    • What do they want? The charge that passes a cross section: how much charge crosses one slice of the wire in that time, in coulombs.
  2. Understand

    • How do I picture it?
    • Picture the wire cut straight across. That cut is the cross section. Stand there and count the charge going past.
    • Current is how much charge passes a point each second. One ampere means one coulomb every second.
  3. Reduce

    • Current is charge per second, I = Q/t. Which line gives the charge? Q = I × t: Charge per second times the number of seconds gives the charge. Multiply both sides of I = Q/t by t.
    • Where do I start?
    • Start from the definition of current: the rate of flow of charge, charge divided by time.
  4. Solve

    • Multiply current by time.
    • Amps are coulombs per second. Times seconds, the seconds cancel and coulombs are left.
    • Q = I t
  5. Check

    • Is it right?
    • Units: A × s = C/s × s = C ✓
    • Work back: charge ÷ time = 37.5 ÷ 25 = 1.5 A, the current given ✓