Step 14 of 14 · Worked example · TEACH

← Number

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Number · Step 14

Apply the trapezoidal rule: Area ≈ h/2 [(first + last) + 2(sum of the rest)].

A field's width is measured every 4 m across a length of 16 m, giving widths 6, 8, 9, 7 and 5 metres. Estimate the field's area using the trapezoidal rule.

Five measured widths across the field

6 m6
8 m8
9 m9
7 m7
5 m5
The trapezoidal rule turns these five widths into an area estimate; the middle three count double.

A field is 16 m long. Its width is measured every 4 m along it.

The widths are 6, 8, 9, 7 and 5 m.

Use the trapezoidal rule to estimate the area of the field.

Read it once, slowly. Then copy it onto your page.
  • What is going on? A field 16 m long with a curved edge. Its width is measured every 4 m: at 0, 4, 8, 12 and 16 m.
  • Five widths: 6, 8, 9, 7 and 5 m. The exam calls them ordinates. Five widths mark out four gaps, so four strips.
  • Estimate the area: close, not exact, because the edge is curved. The trapezoidal rule is the method they want.
Céim

Ordinary Level Maths · Number · Step 14 of 14

Trapezoidal Rule

The trapezoidal rule estimates the area under a curve by summing the areas of a series of trapezia formed by equally spaced measurements.

Why it matters

It gives a practical way to estimate areas — such as land area or a graph's area — when the boundary is curved and no exact formula fits.

The worked example

A field is 16 m long. Its width is measured every 4 m along it. The widths are 6, 8, 9, 7 and 5 m. Use the trapezoidal rule to estimate the area of the field.

How the worked example goes

  1. Read

    • What is going on? A field 16 m long with a curved edge. Its width is measured every 4 m: at 0, 4, 8, 12 and 16 m.
    • Five widths: 6, 8, 9, 7 and 5 m. The exam calls them ordinates. Five widths mark out four gaps, so four strips.
    • Estimate the area: close, not exact, because the edge is curved. The trapezoidal rule is the method they want.
  2. Understand

    • How do strips give an area?
    • Cut the field into four strips, each 4 m wide. Join the ends of each pair of widths with a straight line.
    • Each strip is now a trapezium: two parallel sides (the widths) and a width of 4 m between them.
  3. Reduce

    • Which bracket is right for these widths? 6 + 5 + 2(8 + 9 + 7): Ends once, middle ones twice: each middle width is in two strips.
    • What is h?
    • h is the gap between widths, 4 m. Slip to avoid: the full length, 16 m.
  4. Solve

    • Build the bracket, then × h/2.
    • 6 + 5 = 11
    • 8 + 9 + 7 = 24, 2 × 24 = 48
  5. Check

    • Is it right?
    • Strip by strip: 2 × (left + right)
    • 28 + 34 + 32 + 24 = 118 ✓

Common mistakes to avoid

Key terms

trapezoidal rule · ordinate · strip width · estimate