Step 8 of 14 · Worked example · TEACH

← Number

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Number · Step 8

Follow the worked reasoning stage by stage.

Round 4.682 to two decimal places.

23.5 rounded to one significant figure

given 23.5rounded 20gap 3.5
23.5 is closer to 20 than to 30, since its second digit (3) is less than 5.

A length is measured as 23.5 cm. Its true length is 25 cm.

(a) Find the percentage error.

(b) Estimate 23.5 × 7.8 by rounding each number to one significant figure.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Someone measured 23.5 cm, but the true length is 25 cm. The true value is the one that is really right.
  • (a) wants the percentage error: how far off the measurement is, as a percentage.
  • (b) wants an estimate, not the exact product. Round each number to one significant figure first, then multiply.
Céim

Ordinary Level Maths · Number · Step 8 of 14

Rounding, Estimation, Error & Tolerance

Rounded and measured values carry an error, and estimation checks whether a calculated answer is the right order of size.

Why it matters

Every measurement in construction, science and everyday shopping is approximate, so knowing the size of the possible error matters as much as the value itself.

The worked example

A length is measured as 23.5 cm. Its true length is 25 cm. (a) Find the percentage error. (b) Estimate 23.5 × 7.8 by rounding each number to one significant figure.

How the worked example goes

  1. Read

    • What is going on? Someone measured 23.5 cm, but the true length is 25 cm. The true value is the one that is really right.
    • (a) wants the percentage error: how far off the measurement is, as a percentage.
    • (b) wants an estimate, not the exact product. Round each number to one significant figure first, then multiply.
  2. Understand

    • (a) How far off is it?
    • The error is the gap between measured and true. Only its size matters, so drop any minus sign.
    • |23.5 − 25| = |−1.5| = 1.5 cm
  3. Reduce

    • The error is 1.5 cm. Which gives the percentage error? (1.5)/(25) × 100 = 6%: The error over the true value, then × 100: 1.5 ÷ 25 = 0.06, and 0.06 × 100 = 6.
    • (a) Write the one line to work out.
    • % error = (error)/(true value) × 100
  4. Solve

    • (a) Divide, then × 100.
    • 1.5 ÷ 25 = 0.06
    • 0.06 × 100 = 6
  5. Check

    • (a) Is it right?
    • 6% of the true value
    • 0.06 × 25 = 1.5

Common mistakes to avoid

Key terms

significant figures · decimal places · estimate · percentage error · error · interval · rounding