Step 9 of 12 · Worked example · TEACH

← Geometry & Trigonometry

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Ordinary Level · Geometry · Step 9

Evaluate all three ratios and state the sign of each.

Find sin 150°, cos 150° and tan 150°, without a calculator's decimal shortcut alone — using the supplementary angle 30°.

150° and its reference angle

150°cossin
Reference angle 30° gives the size of each ratio; the quadrant gives the sign.

Find sin 150°, cos 150° and tan 150°.

Use the supplementary angle 30°, not the calculator's decimal alone.

Give the sign of each one.

Read it once, slowly. Then copy it onto your page.
  • What do they want? Three values: sin, cos and tan of 150°. 150° is obtuse: between 90° and 180°.
  • What is the hint? Supplementary means two angles add to 180°: 150° + 30° = 180°. Work through 30°.
  • What is the catch? Not just the calculator: show how the answer comes from 30°, and say if each is + or −.
Céim

Ordinary Level Maths · Geometry & Trigonometry · Step 9 of 12

Sine, Cosine & Tangent for General Angles

Sine, cosine and tangent work for angles past 90°, not just inside a right-angled triangle. For an angle between 90° and 180°, use the reference angle (180° minus the angle) for the size: sin stays positive, cos and tan turn negative.

Why it matters

The Sine Rule and Cosine Rule can produce obtuse angles, so knowing the sign and behaviour of each ratio beyond 90° is essential.

The worked example

Find sin 150°, cos 150° and tan 150°. Use the supplementary angle 30°, not the calculator's decimal alone. Give the sign of each one.

How the worked example goes

  1. Read

    • What do they want? Three values: sin, cos and tan of 150°. 150° is obtuse: between 90° and 180°.
    • What is the hint? Supplementary means two angles add to 180°: 150° + 30° = 180°. Work through 30°.
    • What is the catch? Not just the calculator: show how the answer comes from 30°, and say if each is + or −.
  2. Understand

    • How do I picture an angle over 90°?
    • An arm of length 1 turns anticlockwise from the positive x axis. At 150° it has gone past straight up, and leans left.
    • sin is how high the tip is: above (+) or below (−). cos is how far across: right (+) or left (−).
  3. Reduce

    • Where do I start?
    • Write each ratio of 150° as the same ratio of 30°, with the sign the arm gives it.
    • sin 150° = sin 30°
  4. Solve

    • What are the three values?
    • Calculator in DEG. Key in 30 for each, then put the sign on.
    • sin 30° = 0.5
  5. Check

    • Is it right, and did I answer it?
    • Key in 150 directly, in DEG: 0.5, −0.866025…, −0.577350… All three match, signs too ✓
    • tan = sin ÷ cos: 0.5 ÷ (−0.866025…) = −0.577350… ✓

Common mistakes to avoid

Key terms

obtuse angle · reference angle · sign · supplementary angle