Number

Step 15 of 18 · Worked example

← Number

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Number · Step 15

Convert using the conversion factor squared, then apply the scale factor rule.

A rectangle measures 2 m by 3 m. Convert its area to cm². Then a similar rectangle has lengths three times as large: find its area.

Two similar water tanks hold 0.4 m³ and 1.35 m³.

(a) Write the smaller tank's volume in litres.

(b) The smaller tank is 0.8 m tall. Find the height of the larger tank.

(c) The smaller tank has a surface area of 2.4 m². Find the larger tank's surface area.

Read it once, slowly. Then copy it onto your page.
  • What is going on? Two tanks that are similar: the same shape, different sizes. Both volumes are given, in m³.
  • (a) wants a change of unit: the smaller volume in litres.
  • (b) Only the smaller tank's height, 0.8 m, is given. Find the larger tank's height.
  • (c) The same for area: 2.4 m² on the small tank; find the larger one's.
Céim

Higher Level Maths · Number · Step 15 of 18

Units, Measurement & Scale

Unit conversion, scale factors and the effect of scaling on length, area and volume.

Why it matters

Most measurement marks lost at Higher Level are unit errors, and the length/area/volume scaling rule is examined directly.

The worked example

Two similar water tanks hold 0.4 m³ and 1.35 m³. (a) Write the smaller tank's volume in litres. (b) The smaller tank is 0.8 m tall. Find the height of the larger tank. (c) The smaller tank has a surface area of 2.4 m². Find the larger tank's surface area.

How the worked example goes

  1. Read

    • What is going on? Two tanks that are similar: the same shape, different sizes. Both volumes are given, in m³.
    • (a) wants a change of unit: the smaller volume in litres.
    • (b) Only the smaller tank's height, 0.8 m, is given. Find the larger tank's height.
  2. Understand

    • (a) How big is a cubic metre in cm?
    • 1 m = 100 cm. A cubic metre is a cube 100 cm by 100 cm by 100 cm: three lengths, so three factors of 100.
    • Slip to avoid: multiplying by 100 once. That is the factor for a length, not a volume.
  3. Reduce

    • (a) In what order?
    • Go through cm³: multiply by 100³ to get cm³, then divide by 1,000 to get litres.
    • (b) Where do I start?
  4. Solve

    • 0.4 × 1,000,000 = 400,000 cm³. How many litres is that? 400 litres: 1,000 cm³ make one litre: 400,000 ÷ 1,000 = 400.
    • (a) Convert.
    • 1 m³ = 100 × 100 × 100 = 1,000,000 cm³
  5. Check

    • (a) Is it right?
    • Shortcut: 1 m³ = 1,000,000 ÷ 1,000 = 1,000 litres. So 0.4 × 1,000 = 400 ✓
    • (b) Is it right?

Common mistakes to avoid

Key terms

unit · conversion factor · scale factor · similar · dimension · cm² · m³