Number

Step 11 of 18 · Worked example

← Number

0 of 3 done

Work through the example to CHECK to open the problems.

Reach CHECK to open the problems.Higher Level · Number · Step 11

Estimate first, then quantify the percentage error against the true value.

A rectangle is measured as 12.4 cm by 7.8 cm, each to the nearest 0.1 cm. Estimate the area, then find the percentage error if the area is reported as 96 cm².

(a) Round 0.0073846 to three decimal places and to two significant figures.

(b) Estimate 296 × 6.08 ÷ 0.198. Then evaluate it, and find the percentage error in the estimate.

(c) A tile is 30.0 cm long, with a tolerance of ±0.2 cm. Four tiles laid end to end measure 120.5 cm. Is that total acceptable?

Read it once, slowly. Then copy it onto your page.
  • (a) One number, 0.0073846, rounded two ways: three decimal places and two significant figures.
  • (b) wants three things: an estimate with easy numbers, the real value, and the percentage error in the estimate.
  • (c) Each tile is 30.0 cm, allowed to be 0.2 cm out either way. Four tiles measure 120.5 cm together.
  • (c) wants a decision, acceptable or not, with a reason.
Céim

Higher Level Maths · Number · Step 11 of 18

Estimation, Rounding, Error & Tolerance

Order of magnitude, accumulated error, percentage error, tolerance and justified approximation.

Why it matters

It is the difference between an answer and a defensible answer: knowing how accurate a result is, and when rounding is allowed.

The worked example

(a) Round 0.0073846 to three decimal places and to two significant figures. (b) Estimate 296 × 6.08 ÷ 0.198. Then evaluate it, and find the percentage error in the estimate. (c) A tile is 30.0 cm long, with a tolerance of ±0.2 cm. Four tiles laid end to end measure 120.5 cm. Is that total acceptable?

How the worked example goes

  1. Read

    • (a) One number, 0.0073846, rounded two ways: three decimal places and two significant figures.
    • (b) wants three things: an estimate with easy numbers, the real value, and the percentage error in the estimate.
    • (c) Each tile is 30.0 cm, allowed to be 0.2 cm out either way. Four tiles measure 120.5 cm together.
  2. Understand

    • (a) Where does each count start?
    • Decimal places count from the decimal point. Significant figures count from the first digit that is not 0.
    • The zeros at the front only show where the number sits. They are not significant: here the first significant figure is the 7.
  3. Reduce

    • (a) Where do I cut?
    • 3 digits after the point
    • 0.007 | 3846
  4. Solve

    • Two significant figures: 0.0073 | 846. Which is right? 0.0074: Keep 7 and 3. The next digit is 8, which is 5 or more, so 73 rounds up to 74.
    • (a) Read the next digit each time.
    • 0.007 | 3846: next digit 3, keep → 0.007
  5. Check

    • (a) Is each rounding fair?
    • A good rounding is out by at most half of the last place kept.
    • |0.007 − 0.0073846| = 0.0003846 ≤ 0.0005 ✓

Common mistakes to avoid

Key terms

estimate · round · significant figure · decimal place · order of magnitude · accumulated error · percentage error · tolerance